Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Density | | ASTM D792/ISO 1183 | 1.08 | kg·cm/cm(J/M)ft·lb/in |
| Melt Mass-Flow Rate | | ASTM D1238/ISO 1133 | 12.5 | g/10min |
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | MD | ASTMD955 | 0.40到0.60 | % |
| Melt Mass-Flow Rate | 220°C/10.0kg | ISO1133 | 12 | g/10min |
| Melt Volume flow Rate | 220°C/10.0kg | ISO1133 | 13.0 | cm3/10min |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Flexural Modulus | | ISO178 | 3700 | Mpa |
| Flexural Stress | | ISO178 | 130 | Mpa |
| Tensile Stress | 屈服 | ISO527-2/5 | 69.9 | Mpa |
| Tensile Elongation?(Break) | | ASTM D638/ISO 527 | 2.0 | % |
| Tensile Strength | | ASTM D638/ISO 527 | 72 | kg/cm²(MPa)[Lb/in²] |
| Rockwell Hardness | | ASTM D785 | 83 | |
| Flexural Modulus | | ASTM D790/ISO 178 | 3430 | kg/cm²(MPa)[Lb/in²] |
| Flexural Strength | | ASTM D790/ISO 178 | 105 | kg/cm²(MPa)[Lb/in²] |
| Izod notch impact strength | | ASTM D256/ISO 179 | 15 | kg·cm/cm(J/M)ft·lb/in |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Vicat Softening Temperature | | ISO306/B | 103 | °C |
| Deflection Temperature Under Load? | | ASTM D648/ISO 75 | 90 | ℃（℉） |
| Deflection Temperature Under Load? | 1.8MPa,未退火 | ISO75-2/A | 87.7 | °C |
| Vicat Softening Temperature | | ASTM D1525/ISO R306 | 110 | ℃（℉） |
| RTIElec | | UL746 | 50.0 | °C |
| Evolution Calendar intelligent importer | | UL746 | 50.0 | °C |
| RTI | | UL746 | 50.0 | °C |
| Ball PressureTest | | EMAC | 95 | °C |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 1.5mm | UL94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices