PPA AMODEL® AS-1133 HS NT SOLVAY USA

195

Properties:
High temperature resistan
High rigidity
Low temperature resistanc
Filler: Glass fiber reinf
33% filler by weight
Usages:
Thin walled products
Electrical components
Home appliance components
Automotive Applications
Lawn and garden equipment
Power/Other Tools
Valves/valve components
Industrial components
Industrial applications
Thick wall accessories (c
Machine/mechanical compon
Metal substitution
Connector
Parts under the hood of a
Vehicle electronics
Application in the automo
Fuel pipeline
Oil/Gas Supplies
currency
Shell
Certificates:
UL
Compare
View Prices

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Modeling Shrinkage	MD	ASTMD955	0.40	%
Modeling Shrinkage	Modeling Shrinkage	TD	ASTMD955	0.80	%
Moisture Absorption	24hr	ASTMD570	0.21	%

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Tensile Stress	屈服	ISO527-2	225	Mpa
Tensile Strain	断裂	ISO527-2	3.0	%
Tensile Modulus		ASTMD638	13100	Mpa
Tensile Modulus	Tensile Modulus		ISO527-2	12200	Mpa
Tensile Elongation	断裂	ASTMD638	2.5	%
Flexural Modulus		ASTMD790	10300	Mpa
Flexural Modulus	Flexural Modulus		ISO178	10300	Mpa
Flexural Strength	屈服	ASTMD790	317	Mpa
Flexural Stress		ISO178	326	Mpa
Compressive Strength		ASTMD695	276	Mpa
Shearing Strength		ASTMD732	101	Mpa
Poisson Ratio		7.58	0.41
Tensile Strength	断裂	ASTMD638	221	Mpa

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Peak Melting Temperature		ASTMD3418	310	°C
Continuous Use Temperature	--2	ASTMD3045	164	°C
Continuous Use Temperature	Continuous Use Temperature	--3	ASTMD3045	185	°C
Deflection Temperature Under Load?	0.45MPa,退火,3.18mm	ASTMD648	297	°C
	Deflection Temperature Under Load?	1.8MPa,退火,3.18mm	ASTMD648	285	°C
	Deflection Temperature Under Load?	Deflection Temperature Under Load?	1.8MPa,退火	ISO75-2/Af	277	°C
Linear thermal expansion coefficient	MD：0to100°C	ASTME831	2.3E-05	cm/cm/°C
	Linear thermal expansion coefficient	MD：160to249°C	ASTME831	1.4E-05	cm/cm/°C
		Linear thermal expansion coefficient	TD：0to100°C	ASTME831	5.9E-05	cm/cm/°C
		Linear thermal expansion coefficient	Linear thermal expansion coefficient	TD：160to249°C	ASTME831	1.3E-04	cm/cm/°C
Melting temperature		ISO11357-3	310	°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Dielectric Constant	60Hz	ASTMD150	4.40
Dielectric Constant	Dielectric Constant	1MHz	ASTMD150	4.20
Arc Resistance		ASTMD495	140	sec
Volume Resistivity		ASTMD257	1E+16	ohms·cm
Dielectric Strength	3.17mm	ASTMD149	21	KV/mm
Dissipation Factor?	60Hz	ASTMD150	5E-03
Dissipation Factor?	Dissipation Factor?	1MHz	ASTMD150	0.017
Comparative Tracking Index	CTI	UL746	550	V

Impact Properties	Test Condition	Test Method	Test Result	Unit
Charpy Unnotched Impact Strength		ISO179/1eU	82	kJ/m²

hardness	Test Condition	Test Method	Test Result	Unit
Rockwell Hardness	R级	ASTMD785	125

optical performance	Test Condition	Test Method	Test Result	Unit
Light Transmittance	1070nm:1.60mm	ASTMD1003	>35	%
Light Transmittance	Light Transmittance	940nm:1.60mm	ASTMD1003	>30	%

Flammability	Test Condition	Test Method	Test Result	Unit
Flame Rating	3.2mm	UL94	HB

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

PPA AMODEL® AS-1133 HS NT SOLVAY USA

Technical Data Sheet

You May Like