Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | 流动 : 3.20 mm | 内部方法 | 0.50 到 0.70 | % |
| Modeling Shrinkage | 横向流动 : 3.20 mm | 内部方法 | 0.50 到 0.70 | % |
| Moisture Absorption | 24 hr | ASTM D570 | 0.25 | % |
| Melt Mass-Flow Rate | 280°C/3.8 kg | ASTM D1238 | 24 | g/10 min |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Elongation | 断裂 | ASTM D638 | 25 | % |
| Flexural Modulus | 50.0 mm 跨距 | ASTM D790 | 2510 | Mpa |
| Flexural Strength | 屈服, 50.0 mm 跨距 | ASTM D790 | 88.0 | Mpa |
| Tensile Strength | 屈服 | ASTM D638 | 62.0 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | 0.45 MPa, 未退火, 3.20 mm | ASTM D648 | 115 | °C |
| Deflection Temperature Under Load? | 1.8 MPa, 未退火, 6.40 mm | ASTM D648 | 104 | °C |
| Linear thermal expansion coefficient | 流动 : -20 到 150°C | ASTM E831 | 7.2E-5 | cm/cm/°C |
| Linear thermal expansion coefficient | 横向 : -20 到 150°C | ASTM E831 | 7.2E-5 | cm/cm/°C |
| Thermal Conductivity | | ASTM C177 | 0.25 | W/m/K |
| Injection | Test Condition | Test Method | Test Result | Unit |
|---|
| Drying Temperature | | | 95 到 105 | °C |
| Suggested Max Moisture | | | 0.040 | % |
| Processing (Melt) Temp | | | 260 到 275 | °C |
| Mold Temperature | | | 55 到 70 | °C |
| Drying Time | | | 3.0 到 4.0 | hr |
| Suggested Shot Size | | | 40 到 80 | % |
| Rear Temperature | | | 240 到 255 | °C |
| Middle Temperature | | | 245 到 260 | °C |
| Front Temperature | | | 250 到 265 | °C |
| Nozzle Temperature | | | 245 到 265 | °C |
| Back Pressure | | | 0.300 到 1.00 | Mpa |
| Screw Speed | | | 30 到 80 | rpm |
| Vent Depth | | | 0.038 到 0.076 | mm |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Instrumented Dart Impact | -30°C, Total Energy | ASTM D3763 | 30.0 | J |
| Instrumented Dart Impact | 23°C, Total Energy | ASTM D3763 | 47.0 | J |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell Hardness | R 级 | ASTM D785 | 110 | |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Gardner | 60°, 无织构 | ASTM D523 | 94 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices