Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | MD：3.20mm | 内部方法 | 0.50to0.70 | % |
| Modeling Shrinkage | TD：3.20mm | 内部方法 | 0.50to0.70 | % |
| Melt Mass-Flow Rate | 337°C/6.6kg | ASTMD1238 | 13 | g/10min |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Flexural Strength | Yield,50.0mmSpan | ASTMD790 | 207 | Mpa |
| Flexural Strength | Break,100mmSpan | ASTMD790 | 207 | Mpa |
| Flexural Modulus | 100mmSpan4 | ASTMD790 | 6890 | Mpa |
| Flexural Modulus | 50.0mm跨距5 | ASTMD790 | 6890 | Mpa |
| Tensile Elongation | 屈服 | ASTMD638 | 3.0 | % |
| Tensile Modulus | | ASTMD638 | 6890 | Mpa |
| Tensile Strength | 屈服 | ASTMD638 | 138 | Mpa |
| Tensile Strength | 断裂 | ASTMD638 | 138 | Mpa |
| Tensile Elongation | 断裂 | ASTMD638 | 3.0 | % |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | 0.45MPa,未退火,6.40mm | ASTMD648 | 214 | °C |
| Deflection Temperature Under Load? | 1.8MPa,未退火,3.20mm | ASTMD648 | 206 | °C |
| Deflection Temperature Under Load? | 1.8MPa,未退火,6.40mm | ASTMD648 | 209 | °C |
| Deflection Temperature Under Load? | 0.45MPa,未退火,3.20mm | ASTMD648 | 211 | °C |
| Vicat Softening Temperature | | ASTMD15256 | 210 | °C |
| RTIElec | | UL746 | 105 | °C |
| Evolution Calendar intelligent importer | | UL746 | 105 | °C |
| RTIStr | | UL746 | 105 | °C |
| Linear thermal expansion coefficient | MD：-40到40°C | ASTME831 | 3.6E-05 | cm/cm/°C |
| Linear thermal expansion coefficient | TD：-40到40°C | ASTME831 | 7.2E-05 | cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot-wire Ignition | HWI | UL746 | PLC1 | |
| High Amp Arc Ignition | HAI | UL746 | PLC3 | |
| High Voltage Arc Tracking Rate | HVTR | UL746 | PLC3 | |
| Comparative Tracking Index | CTI | UL746 | PLC4 | |
| Arc Resistance | | ASTMD495 | PLC6 | |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Instrumented Dart Impact | 23°C,TotalEnergy | ASTMD3763 | 14.9 | J |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| Flame Rating | 0.41mm | UL94 | V-0 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices