PBT VALOX™ ENH4550 SABIC INNOVATIVE US

174

Properties:
High rigidity
Glass fiber reinforced
Usages:
Electrical applications
Automotive Applications
Certificates:
UL
Compare
View Prices

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Modeling Shrinkage	MD：--2	内部方法	0.10to0.50	%
	Modeling Shrinkage	MD：3.20mm	内部方法	0.10to0.50	%
		Modeling Shrinkage	TD：--2	内部方法	0.60to1.2	%
		Modeling Shrinkage	Modeling Shrinkage	TD：3.20mm	内部方法	0.50to1.1	%
Moisture Absorption	饱和,23°C	ISO62	0.23	%
Moisture Absorption	Moisture Absorption	平衡,23°C,50%RH	ISO62	0.060	%
Melt Mass-Flow Rate	250°C/5.0kg	ASTMD1238	27	g/10min
Melt Volume flow Rate	250°C/5.0kg	ISO1133	20.0	cm3/10min
Melt Viscosity	250°C,1500sec^-1	ISO11443	210	Pa·s

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Tensile Stress	屈服	ISO527-2/5	112	Mpa
Tensile Stress	Tensile Stress	断裂	ISO527-2/5	112	Mpa
Tensile Strain	屈服	ISO527-2/5	2.0	%
Tensile Strain	Tensile Strain	断裂	ISO527-2/5	2.0	%
Tensile Modulus		ISO527-2/1	10400	Mpa
Tensile Elongation	断裂	ASTMD638	2.0	%
Tensile Elongation	Tensile Elongation	屈服	ASTMD638	2.0	%
Flexural Modulus	50.0mmSpan	ASTMD790	9100	Mpa
Flexural Strength	Yield,50.0mmSpan	ASTMD790	161	Mpa
Tensile Strength	屈服	ASTMD638	105	Mpa
Flexural Strength		ISO178	170	Mpa
Tensile Modulus		ASTMD638	9900	Mpa
Tensile Strength	Break	ASTMD638	105	Mpa
Flexural Modulus		ISO178	9400	Mpa
Flexural Strain (Break)		ISO178	2.0	%

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Heat Deflection Temperature	1.8MPa,Unannealed,64.0mmSpan	ISO75-2/Af	201	°C
Heat Deflection Temperature	Heat Deflection Temperature	0.45MPa,Unannealed,64.0mmSpan	ISO75-2/Bf	219	°C
Ball PressureTest	125°C	IEC60695-10-2	Pass
Deflection Temperature Under Load?	0.45MPa,未退火,3.20mm	ASTMD648	216	°C
Deflection Temperature Under Load?	Deflection Temperature Under Load?	1.8MPa,未退火,3.20mm	ASTMD648	204	°C
Vicat Softening Temperature	--	ASTMD152512	215	°C
	Vicat Softening Temperature	--	ASTMD152513	202	°C
		Vicat Softening Temperature	--	ISO306/A50	219	°C
			Vicat Softening Temperature	--	ISO306/B50	206	°C
			Vicat Softening Temperature	Vicat Softening Temperature	--	ISO306/B120	206	°C
RTIElec		UL746	130	°C
Evolution Calendar intelligent importer		UL746	140	°C
RTIStr		UL746	140	°C
Linear thermal expansion coefficient	MD：-40to40°C	ASTME831	2.7E-05	cm/cm/°C
	Linear thermal expansion coefficient	MD：-40to150°C	ASTME831	2.2E-05	cm/cm/°C
		Linear thermal expansion coefficient	MD：-40to40°C	ISO11359-2	3E-05	cm/cm/°C
			Linear thermal expansion coefficient	MD：23到80°C	ISO11359-2	2.2E-05	cm/cm/°C
				Linear thermal expansion coefficient	TD：-40to40°C	ASTME831	7.1E-05	cm/cm/°C
					Linear thermal expansion coefficient	TD：-40to150°C	ASTME831	7.7E-05	cm/cm/°C
						Linear thermal expansion coefficient	TD：-40to40°C	ISO11359-2	7.6E-05	cm/cm/°C
						Linear thermal expansion coefficient	Linear thermal expansion coefficient	TD：23到80°C	ISO11359-2	9.1E-05	cm/cm/°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Dielectric Strength	3.20mm,inAir	ASTMD149	21	KV/mm
Dielectric Strength	Dielectric Strength	3.20mm,在油中	ASTMD149	21	KV/mm
Comparative Tracking Index	CTI	UL746	PLC2
Comparative Tracking Index	Comparative Tracking Index		IEC60112	300	V
Volume Resistivity		ASTMD257	1.0E+15to1.0E+16	ohms·cm
Volume Resistivity	Volume Resistivity		IEC60093	1.0E+15to1.0E+16	ohms·cm
Arc Resistance		ASTMD495	PLC6
Hot-wire Ignition	HWI	UL746	PLC0
High Amp Arc Ignition	HAI	UL746	PLC0
High Voltage Arc Tracking Rate	HVTR	UL746	PLC0

Impact Properties	Test Condition	Test Method	Test Result	Unit
Notched Izod Impact Strength	-30°C	ISO180/1A	7.0	kJ/m²
Notched Izod Impact Strength	Notched Izod Impact Strength	23°C	ISO180/1A	7.0	kJ/m²
Unnotched Izod Impact Strength	-30°C	ISO180/1U	29	kJ/m²
Unnotched Izod Impact Strength	Unnotched Izod Impact Strength	23°C	ISO180/1U	33	kJ/m²
Charpy Unnotched Impact Strength	-30°C	ISO179/2U	33	kJ/m²
Charpy Unnotched Impact Strength	Charpy Unnotched Impact Strength	23°C	ISO179/2U	36	kJ/m²
Instrumented Dart Impact	23°C,TotalEnergy	ASTMD3763	6.50	J

Flammability	Test Condition	Test Method	Test Result	Unit
Glow Wire Ignition Temperature	0.8mm	IEC60695-2-13	775	°C
Glow Wire Ignition Temperature	Glow Wire Ignition Temperature	3.0mm15	IEC60695-2-13	775	°C
UL flame retardant rating	0.75mm	UL94	V-0
UL flame retardant rating	UL flame retardant rating	3.0mm	UL94	5VA
Glow Wire Flammability Index	0.75mm	IEC60695-2-12	960	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

PBT VALOX™ ENH4550 SABIC INNOVATIVE US

Technical Data Sheet

You May Like