PA66 Vydyne® 21SPC ASCEND USA

230

Certificates:
MSDS
UL
Compare
View Prices

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result	Unit
Shrinkage rate	横向流量 : 23°C, 2.00 mm	ISO 294-4	1.7	%
Shrinkage rate	Shrinkage rate	流量 : 23°C, 2.00 mm	ISO 294-4	1.8	%
Water absorption rate	24 hr, 23°C	ISO 62	1.2	%
Water absorption rate	Water absorption rate	平衡, 23°C, 50% RH	ISO 62	2.4	%
Outdoor applicability	全部	UL 746C	f2
density		ISO 1183	1.14	g/cm³

Mechanical performance	Test Condition	Test Method	Test Result	Unit
Poisson's ratio		ISO 527	0.40
Tensile stress	屈服, 23°C	ISO 527-2	82.0	Mpa
Tensile stress	Tensile stress	断裂, 23°C	ISO 527-2	55.0	Mpa
Tensile strain	屈服, 23°C	ISO 527-2	5.0	%
Tensile modulus	23°C	ISO 527-2	3100	Mpa
Bending modulus	23°C	ISO 178	2900	Mpa
bending strength	23°C	ISO 178	80.0	Mpa
Nominal tensile fracture strain	23°C	ISO 527-2	25	%

Thermal performance	Test Condition	Test Method	Test Result	Unit
RTI	0.40 mm	UL 746	75.0	°C
	RTI	0.71 mm	UL 746	85.0	°C
		RTI	1.5 mm	UL 746	85.0	°C
		RTI	RTI	3.0 mm	UL 746	85.0	°C
RTI Imp	0.40 mm	UL 746	75.0	°C
	RTI Imp	0.71 mm	UL 746	75.0	°C
		RTI Imp	1.5 mm	UL 746	75.0	°C
		RTI Imp	RTI Imp	3.0 mm	UL 746	75.0	°C
RTI Elec	0.40 mm	UL 746	130	°C
	RTI Elec	0.71 mm	UL 746	130	°C
		RTI Elec	1.5 mm	UL 746	130	°C
		RTI Elec	RTI Elec	3.0 mm	UL 746	130	°C
Hot deformation temperature	0.45 MPa, 未退火	ISO 75-2/B	200	°C
Hot deformation temperature	Hot deformation temperature	1.8 MPa, 未退火	ISO 75-2/A	70.0	°C
Linear coefficient of thermal expansion	流动 : 23 到 55°C	ISO 11359-2	1.0E-4	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	横向 : 23 到 55°C	ISO 11359-2	1.0E-4	cm/cm/°C
Melting temperature		ISO 11357-3	260	°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Dielectric strength	1.00 mm	IEC 60243	26	KV/mm
Leakage Trace Index	3.00 mm	IEC 60112	600	V
Arc resistance	3.00 mm	ASTM D495	PLC 5
Volume resistivity	0.750 mm	IEC 60093	1.0E+13	ohms·cm
High arc combustion index (HAI)	0.40 mm	UL 746	PLC 1
	High arc combustion index (HAI)	0.71 mm	UL 746	PLC 0
		High arc combustion index (HAI)	1.5 mm	UL 746	PLC 0
		High arc combustion index (HAI)	High arc combustion index (HAI)	3.0 mm	UL 746	PLC 0
Hot wire ignition (HWI)	0.40 mm	UL 746	PLC 4
	Hot wire ignition (HWI)	0.71 mm	UL 746	PLC 4
		Hot wire ignition (HWI)	1.5 mm	UL 746	PLC 3
		Hot wire ignition (HWI)	Hot wire ignition (HWI)	3.0 mm	UL 746	PLC 2
High Voltage Arc Traceability Rate (HVTR)		UL 746	PLC 0

injection	Test Result	Unit
Suggested maximum recycled material ratio	50	%
drying temperature	< 70	°C
Processing (melt) temperature	285 到 300	°C
Mold temperature	65 到 95	°C
drying time	1.0 到 3.0	hr
Temperature at the rear of the barrel	260 到 280	°C
Temperature in the middle of the barrel	270 到 285	°C
Temperature at the front of the material cylinder	280 到 290	°C
Spray nozzle temperature	280 到 300	°C

Impact performance	Test Condition	Test Method	Test Result	Unit
Charpy Notched Impact Strength	-30°C	ISO 179/1eA	5.0	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C	ISO 179/1eA	6.0	kJ/m²
Impact strength of cantilever beam gap	-30°C	ISO 180	5.0	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C	ISO 180	6.0	kJ/m²
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	无断裂
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	无断裂

flammability	Test Condition	Test Method	Test Result	Unit
Burning wire flammability index	0.40 mm	IEC 60695-2-12	960	°C
	Burning wire flammability index	0.71 mm	IEC 60695-2-12	960	°C
		Burning wire flammability index	1.5 mm	IEC 60695-2-12	960	°C
		Burning wire flammability index	Burning wire flammability index	3.0 mm	IEC 60695-2-12	960	°C
Extreme Oxygen Index		ISO 4589-2	25	%
Hot filament ignition temperature	0.40 mm	IEC 60695-2-13	825	°C
	Hot filament ignition temperature	0.71 mm	IEC 60695-2-13	850	°C
		Hot filament ignition temperature	1.5 mm	IEC 60695-2-13	850	°C
		Hot filament ignition temperature	Hot filament ignition temperature	3.0 mm	IEC 60695-2-13	850	°C
UL flame retardant rating	0.40 mm	UL 94	V-2
	UL flame retardant rating	0.71 mm	UL 94	V-2
		UL flame retardant rating	1.5 mm	UL 94	V-2
		UL flame retardant rating	UL flame retardant rating	3.0 mm	UL 94	V-2

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

PA66 Vydyne® 21SPC ASCEND USA

Technical Data Sheet

You May Like