Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | MD | ASTMD955 | 0.60 | % |
| Shrinkage rate | TD | ASTMD955 | 0.60 | % |
| Water absorption rate | 24hr | ASTMD570 | 0.39 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| elongation | 断裂 | ASTMD638 | 15 | % |
| Bending modulus | | ASTMD790 | 2450 | Mpa |
| bending strength | | ASTMD790 | 118 | Mpa |
| Tensile strength | | ASTMD638 | 77.0 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 1.8MPa,未退火 | ASTMD648 | 203 | °C |
| Linear coefficient of thermal expansion | MD:-50到150°C | ASTMD696 | 5.9E-05 | cm/cm/°C |
| Linear coefficient of thermal expansion | TD:50到150°C | ASTMD696 | 6.2E-05 | cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Arc resistance | | ASTMD495 | 80.0 | sec |
| Volume resistivity | | ASTMD257 | 1E+16 | ohms·cm |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Cantilever beam without notch impact strength | 6.40mm | ASTMD256 | 980 | J/m |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell hardness | R级 | ASTMD785 | 118 | |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 0.43mm | UL94 | V-0 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices