Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | MD：3.18mm | ASTMD955 | 0.70 | % |
| Water absorption rate | 24hr | ASTMD570 | 0.37 | % |
| Water absorption rate | 平衡 | ASTMD570 | 1.1 | % |
| Melt mass flow rate | 365°C/5.0kg | ASTMD1238 | 20to28 | g/10min |
| Density/specific gravity | | ASTMD792 | 1.29 | g/cm³ |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Flexural Strength | 5.0%Strain,3.18mm | ASTMD790 | 91.0 | Mpa |
| Tensile modulus | 3.18mm | ASTMD638 | 2340 | Mpa |
| tensile strength | 3.18mm | ASTMD638 | 69.6 | Mpa |
| elongation | 屈服,3.18mm | ASTMD638 | 7.2 | % |
| elongation | 断裂,3.18mm | ASTMD638 | 60to120 | % |
| Bending modulus | 3.17mm | ASTMD790 | 2410 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 1.8MPa,未退火,3.18mm | ASTMD648 | 207 | °C |
| Linear coefficient of thermal expansion | MD：3.18mm | ASTMD696 | 5.6E-05 | cm/cm/°C |
| Glass transition temperature 2 | | DSC | 220 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| VolumeResistivity | 3.18mm | ASTMD257 | 9E+15 | ohms·cm |
| DielectricConstant | 3.18mm,60Hz | ASTMD150 | 3.44 | |
| Dielectric strength | 0.0254mm | ASTMD149 | >200 | KV/mm |
| Dielectric strength | 3.18mm | ASTMD149 | 15 | KV/mm |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Impact strength of cantilever beam gap | 3.17mm | ASTMD256 | 690 | J/m |
| TensileImpactStrength | 3.18mm | ASTMD1822 | 399 | kJ/m² |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Refractive index | | ASTMD542 | 1.672 | |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| FlameRating3 | 0.76mm | UL94 | V-0 | |
| Supplementary Information | Test Condition | Test Method | Test Result | Unit |
|---|
| SteamSterilization-w/Morpholine4 | | | >1000 | cycles |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices