Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | MD：3.20mm | ASTMD955 | 0.40to0.70 | % |
| Water absorption rate | 饱和 | ISO622 | 0.16 | % |
| Melt mass flow rate | 200°C/5.0kg | ASTMD1238 | 3.0 | g/10min |
| Melt mass flow rate | 220°C/10.0kg | ASTMD1238 | 29 | g/10min |
| Melt mass flow rate | 230°C/3.8kg | ASTMD1238 | 10 | g/10min |
| Density/specific gravity | | ASTMD792 | 1.07 | g/cm³ |
| Density/specific gravity | | ISO11832 | 1070 | kg/m3 |
| Meltvolume-flowrate | 220°C/10.0kg | ISO11332 | 31.0 | cm3/10min |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile strain 4 | Break,3.20mm | ASTMD638 | 6.0 | % |
| Bending modulus 5 | 3.20mm | ASTMD790 | 3680 | Mpa |
| Tensile modulus 3 | 3.20mm | ASTMD638 | 3110 | Mpa |
| Tensile strength 4 | Yield,3.20mm | ASTMD638 | 73.5 | Mpa |
| Bending strength 5 | 3.20mm | ASTMD790 | 118 | Mpa |
| Tensile modulus | | ISO527-22 | 3300 | Mpa |
| Tensile stress | 断裂 | ISO527-22 | 70.0 | Mpa |
| Tensile strain | 断裂 | ISO527-22 | 6.0 | % |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| RTIElec | | UL746 | 50.0 | °C |
| Evolution Calendar intelligent importer | | UL746 | 50.0 | °C |
| RTIStr | | UL746 | 50.0 | °C |
| Linear coefficient of thermal expansion | MD | ISO11359-22 | 6.7E-05 | cm/cm/°C |
| Linear coefficient of thermal expansion | TD | ISO11359-22 | 6.7E-05 | cm/cm/°C |
| Hot deformation temperature | 1.8MPa,未退火,6.40mm | ASTMD648 | 90.0 | °C |
| Glass transition temperature 8 | | ISO11357-22 | 110 | °C |
| Vicat softening temperature | | ASTMD1525 | 100 | °C |
| Vicat softening temperature | 50N | ISO3062 | 100 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Electrical strength | | IEC60243-12 | 51 | KV/mm |
| Surface resistivity | | IEC600932 | >1.0E+15 | ohms |
| Volume resistivity | | IEC600932 | >1.0E+13 | ohms·m |
| Compared to the leakage trace index | | IEC601122 | 375 | |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Charpy Notched Impact Strength | -30°C | ISO179/1eA2 | 2.00 | kJ/m² |
| Impact strength of cantilever beam gap | -30°C,6.40mm | ASTMD256 | 9.8 | J/m |
| Impact strength of cantilever beam gap | 23°C,6.40mm | ASTMD256 | 9.8 | J/m |
| Charpynotchedimimpact string | 23°C | ISO179/1eA2 | 2.80 | kJ/m² |
| Charpy impact strength | 23°C | ISO179/1eU2 | 13.0 | kJ/m² |
| Charpyimpactstrength | -30°C | ISO179/1eU2 | 4.80 | kJ/m² |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell hardness | R级 | ASTMD785 | 123 | |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 1.6mm | UL94 | HB | |
| UL flame retardant rating | 3.2mm | UL94 | HB | |
| Burning Behav.atthicknessh | 3.20mm,UL | ISO12102 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices