Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Spiral flow length | 260℃，2×8.7mm | | 380 | mm |
| Melt index | 240℃ | ISO 1133 | 20 | CM |
| Shrinkage rate | 流动方向，500bar | ISO 2577 | 0.4-0.6 | % |
| Shrinkage rate | 垂直流动方向，500bar | ISO 2577 | 0.4-0.6 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Across Flow | 50mm/min | ISO 527 | >50 | % |
| Tensile modulus | 1mm/min | ISO 527 | 2600 | Mpa |
| tensile strength | 50mm/min | ISO 527 | 50 | Mpa |
| Yield stress | 50mm/min | ISO 527 | 60 | Mpa |
| IZOD notch impact strength | -30℃ | ISO 180-1A | 15 | KJ/m |
| Yield strain | 50mm/min | ISO 527 | 4 | % |
| IZOD notch impact strength | 23℃ | ISO 180-1A | 50 | KJ/m |
| IZOD impact strength | 23℃ | ISO 180-1U | N | KJ/m |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Linear coefficient of thermal expansion | 流动方向，23至55℃ | ASTM E 831 | 0.76 | |
| Linear coefficient of thermal expansion | 垂直流动方向，23至55℃ | ASTM E 831 | 0.80 | |
| Hot deformation temperature | 1.80MPa | ISO 75 | 90 | °C |
| Vicat softening temperature | 50N;50K/h | ISO 306 | 108 | °C |
| Hot deformation temperature | 0.45MPa | ISO 75 | 100 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Surface resistivity | | IEC 93 | 1E+14 | Ω |
| Relative dielectric constant | 1MHZ | IEC 250 | 3.1 | |
| Volume resistivity | | IEC 93 | 1E+15 | Ω.m |
| loss factor | 100HZ | IEC 250 | 30 | 0.0001 |
| Relative dielectric constant | 100HZ | IEC 250 | 3.2 | |
| loss factor | 1MHZ | IEC 250 | 80 | 0.0001 |
| tracking resistance | 溶液A | IEC 112 | 500 | 等级 |
| Dielectric strength | | IEC 243-1 | 30 | KV/mm |
| Processing performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Mold temperature | | ISO 294 | 80 | °C |
| Injection speed | | ISO 294 | 240 | mm/s |
| Melt Temperature | | ISO 294 | 240 | °C |
| Other performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hygroscopicity | 23℃/50%相对湿度 | ISO 62 | 0.2 | % |
| Water absorption | 23℃饱和吸水 | ISO 62 | 0.5 | % |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Density/specific gravity | | ISO 1183 | 1190 | kg/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices