PC/ABS Bayblend® FR110-901510 COVESTRO THAILAND
114
- Unit Price:
- $3506 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 10MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:Flame retardant Photostability Injection grade Flame retardants do not c Chlorine and bromine White hot metal wire temp Good light stability
- Application Areas:--
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Shrinkage rate | Flow ，500bar | ISO 2577 | 0.4-0.6 | % |
| 垂直Flow ，500bar | ISO 2577 | 0.4-0.6 | % | |
| Melt index | 240℃ | ISO 1133 | 20 | CM |
| Spiral flow length | 260℃，2×8.7mm | 380 | mm |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Across Flow | 50mm/min | ISO 527 | >50 | % |
| Yield strain | 50mm/min | ISO 527 | 4 | % |
| Yield stress | 50mm/min | ISO 527 | 60 | Mpa |
| IZOD notch impact strength | -30℃ | ISO 180-1A | 15 | KJ/m |
| 23℃ | ISO 180-1A | 50 | KJ/m | |
| Tensile modulus | 1mm/min | ISO 527 | 2600 | Mpa |
| tensile strength | 50mm/min | ISO 527 | 50 | Mpa |
| IZOD impact strength | 23℃ | ISO 180-1U | N | KJ/m |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Hot deformation temperature | 1.80MPa | ISO 75 | 90 | °C |
| 0.45MPa | ISO 75 | 100 | °C | |
| Vicat softening temperature | 50N;50K/h | ISO 306 | 108 | °C |
| Linear coefficient of thermal expansion | Flow ，23至55℃ | ASTM E 831 | 0.76 | |
| 垂直Flow ，23至55℃ | ASTM E 831 | 0.80 |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Relative dielectric constant | 1MHZ | IEC 250 | 3.1 | |
| 100HZ | IEC 250 | 3.2 | ||
| Surface resistivity | IEC 93 | 1E+14 | Ω | |
| Volume resistivity | IEC 93 | 1E+15 | Ω.m | |
| Dielectric strength | IEC 243-1 | 30 | KV/mm | |
| loss factor | 1MHZ | IEC 250 | 80 | 0.0001 |
| 100HZ | IEC 250 | 30 | 0.0001 | |
| tracking resistance | 溶液A | IEC 112 | 500 | 等级 |
| Processing performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Injection speed | ISO 294 | 240 | mm/s | |
| Melt Temperature | ISO 294 | 240 | °C | |
| Mold temperature | ISO 294 | 80 | °C |
| Other performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Hygroscopicity | 23℃/50%相对湿度 | ISO 62 | 0.2 | % |
| Water absorption | 23℃Saturation吸水 | ISO 62 | 0.5 | % |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Density/specific gravity | ISO 1183 | 1190 | kg/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.