ABS/PMMA STAREX® BF-0670 BK22101 Samsung Cheil South Korea
641
- Properties:High temperature resistanAging resistanceHigh impact resistance
- Usages:Electrical appliancesElectronic and electricalAutomotive componentsLighting fixtures
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Melt mass flow rate | 220°C/10.0kg | ASTMD1238 | 25 | g/10min |
| 220°C/10.0kg | ISO1133 | 24 | g/10min | |
| Shrinkage rate | MD：3.20mm | ASTMD955 | 0.30 | % |
| TD：3.20mm | ASTMD955 | 0.30 | % | |
| TD:3.20mm | ISO2577 | 0.40 | % | |
| MD:3.20mm | ISO2577 | 0.40 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile modulus 2 | ASTMD638 | 2080 | Mpa | |
| Tensile modulus | ISO527-2/50 | 2500 | Mpa | |
| Tensile strength 2 | 屈服 | ASTMD638 | 49.0 | Mpa |
| Tensile stress | 屈服 | ISO527-2/50 | 52.0 | Mpa |
| Tensile strength 2 | 断裂 | ASTMD638 | 36.3 | Mpa |
| Tensile stress | 断裂 | ISO527-2/50 | 36.0 | Mpa |
| Elongation rate 2 | 断裂 | ASTMD638 | 18 | % |
| Tensile strain | 断裂 | ISO527-2/50 | 22 | % |
| Bending modulus 3 | ASTMD790 | 2350 | Mpa | |
| Bending modulus 4 | ISO178 | 2360 | Mpa | |
| Bending strength 3 | ASTMD790 | 66.7 | Mpa | |
| Bending stress 4 | ISO178 | 70.0 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Hot deformation temperature | 1.8MPa,未退火,6.40mm | ASTMD648 | 80.0 | °C |
| 1.8MPa,Unannealed,4.00mm | ISO75-2/A | 72.0 | °C | |
| 1.8MPa,Annealed,4.00mm | ISO75-2/A | 86.0 | °C | |
| Vicat softening temperature | -- | ISO306/B50 | 92.090.0 | °C |
| -- | ISO306/B120 | 92.0 | °C | |
| Hot deformation temperature | 0.45MPa,未退火,6.40mm | ASTMD648 | 90.0 | °C |
| 0.45MPa,Unannealed,4.00mm | ISO75-2/B | 83.0 | °C | |
| 0.45MPa,Annealed,4.00mm | ISO75-2/B | 92.0 | °C |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| CharpyNotchedImpactStrength5 | 23°C | ISO179/1eA | 8.0 | kJ/m² |
| Suspended wall beam gap impact strength 5 | 23°C | ISO180/1A | 7.4 | kJ/m² |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Rockwell hardness | R级 | ASTMD785 | 114 | |
| R级 | ISO2039-2 | 115 | ||
| PencilHardness | --6 | JISK5401 | F | |
| --7 | JISK5401 | F |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| UL flame retardant rating | 0.8mm | UL94 | HB | |
| 2.0mm | UL94 | HB | ||
| 3.0mm | UL94 | HB |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
