Technical Data Sheet
| Physical properties | Test Condition | Test Method | Test Result | Unit |
|---|
| density | | ASTM D792/ISO 1183 | 1690 | |
| Molding shrinkage rate | | ASTM D955 | 0.85 | % |
| Water absorption rate 23 ℃/24h | | ASTM D570/ISO 62 | 0.14 | % |
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Water absorption rate | 饱和,23°C,2.00mm | ISO62 | 0.62 | % |
| Water absorption rate | 平衡,23°C,2.00mm,50%RH | ISO62 | 0.14 | % |
| Shrinkage rate | TD | ISO294-4 | 0.80 | % |
| Shrinkage rate | MD | ISO294-4 | 0.20 | % |
| Top out temperature | | | 170 | °C |
| Melt volume flow rate | 280°C/2.16kg | ISO1133 | 2.50 | cm3/10min |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| TensileCreepModule | 1hr | ISO899-1 | 15600 | Mpa |
| Tensile creep modulus | 1000hr | ISO899-1 | 13300 | Mpa |
| Tensile stress | 断裂 | ISO527-2 | 182 | Mpa |
| Tensile strain | 断裂 | ISO527-2 | 2.0 | % |
| Tensile modulus | | ASTM D412/ISO 527 | 15500 | kg/cm²(MPa)[Lb/in²] |
| Tensile modulus | | ISO527-2 | 15500 | Mpa |
| Rockwell hardness | | ASTM D785 | 100 | |
| Bending modulus | | ASTM D790/ISO 178 | 13500 | kg/cm²(MPa)[Lb/in²] |
| Bending modulus | | ISO178 | 13500 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Combustibility (rate) | | UL94 | HB | |
| Hot deformation temperature | | ASTM D648/ISO 75 | 250 | ℃（℉） |
| Hot deformation temperature | | ASTM D648/ISO 75 | 226 | ℃（℉） |
| Hot deformation temperature | 1.8MPa,未退火 | ISO75-2/A | 226 | °C |
| Hot deformation temperature | 8.0MPa,未退火 | ISO75-2/C | 180 | °C |
| Linear coefficient of thermal expansion | MD | ISO11359-2 | 1.5E-05 | cm/cm/°C |
| Linear coefficient of thermal expansion | TD | ISO11359-2 | 8.3E-05 | cm/cm/°C |
| Vicat softening temperature | | ISO306/B50 | 230 | °C |
| Melting temperature 2 | | ISO11357-3 | 252 | °C |
| thermal conductivity | | | 0.32 | W/m/K |
| EffectiveThermalDiffusivity | | | 1.4E-07 | m²/s |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Compared to the anti leakage trace index | CTI | UL746 | PLC2 | |
| Dielectric strength | | IEC60243-1 | 32 | KV/mm |
| Relative permittivity | 100Hz | IEC60250 | 4.50 | |
| Relative permittivity | 1MHz | IEC60250 | 4.40 | |
| Leakage Trace Index | | IEC60112 | 250 | V |
| Dissipation factor | 100Hz | IEC60250 | 7E-03 | |
| Dissipation factor | 1MHz | IEC60250 | 0.011 | |
| Surface resistivity | | ASTM D257/IEC 60093 | 1.00E+14 | Ω |
| Surface resistivity | | IEC60093 | 1E+14 | ohms |
| Dielectric constant | | ASTM D150/IEC 60250 | 4.5 | |
| Dielectric constant | | ASTM D150/IEC 60250 | 4.4 | |
| Volume resistivity | | ASTM D257/IEC 60093 | 1.00E+13 | Ω.cm |
| Volume resistivity | | IEC60093 | 1E+15 | ohms·cm |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Impact strength of simply supported beam without notch | -30°C | ISO179/1eU | 40 | kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO179/1eU | 60 | kJ/m² |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell hardness | M计秤 | ISO2039-2 | 100 | |
| Rockwell hardness | R计秤 | ISO2039-2 | 120 | |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 0.75mm | UL94 | HB | |
| UL flame retardant rating | 1.5mm | UL94 | HB | |
| UL flame retardant rating | 0.75mm | IEC60695-11-10,-20 | HB | |
| UL flame retardant rating | 1.5mm | IEC60695-11-10,-20 | HB | |
| Extreme Oxygen Index | | ISO4589-2 | 20 | % |
| FMVSS flammability | | FMVSS302 | B | |
| Fogging-G-value | condensate | ISO6452 | 0.0 | g |
| Burning rate 3 | 1.00mm | ISO3795 | <100 | mm/min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices