PC Makrolon® 2097 COVESTRO GERMANY

262

Unit Price:
$12346 USD/MT
Packaging Specification:
25 KG/PKG
Supply Quantity:
26MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 2787 3515View

serv********View

For more detailed information including pricing, customization, and shipping, please contact supplier.

Material Description

Technical Data Sheet

Material Description

Material Properties:UV curing Good demolding performanc High temperature resistan High mobility
Application Areas:Automotive sector Medical supplies Lighting fixtures
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result	Unit
density	23°C	ISO 1183	1.13	g/cm³
Melt flow rate	330°C/2.16 kg	ISO 1133	8.0	g/10 min
Molten Volume Flow Rate (MVR)	330°C/2.16 kg	ISO 1133	8.00	cm3/10min
Shrinkage rate 3	Across Flow : 2.00 mm	ISO 294-4	0.90	%
Shrinkage rate 3	Shrinkage rate 3	流量 : 2.00 mm	ISO 294-4	0.90	%
Water absorption rate	Saturation, 23°C	ISO 62	0.30	%
Water absorption rate	Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	0.12	%

Mechanical performance	Test Condition	Test Method	Test Result	Unit
Tensile modulus	23°C	ISO 527-2/1	2450	Mpa
Tensile stress	Yield, 23°C	ISO 527-2/50	76.0	Mpa
Tensile strain	Yield, 23°C	ISO 527-2/50	6.9	%
Nominal tensile fracture strain	23°C	ISO 527-2/50	> 50	%
Bending modulus	23°C	ISO 178	2450	Mpa
Bending stress	23°C	ISO 178	110	Mpa

Thermal performance	Test Condition	Test Method	Test Result	Unit
Hot deformation temperature	0.45 MPa, Unannealed	ISO 75-2/B	191	°C
Hot deformation temperature	Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/A	172	°C
Vicat softening temperature		ISO 306/B120	202	°C
Linear coefficient of thermal expansion	Flow : 23 to 55°C	ISO 11359-2	6.5E-5	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Across Flow : 23 to 55°C	ISO 11359-2	6.5E-5	cm/cm/°C
RTI Elec		UL 746	150	°C
RTI Imp		UL 746	130	°C
RTI		UL 746	150	°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Surface resistivity		IEC 60093	1.0E+16	ohms
Volume resistivity	23°C	IEC 60093	1.0E+17	ohms·cm
Dielectric strength	23°C, 1.00 mm	IEC 60243-1	35	KV/mm
Relative permittivity	23°C, 100 Hz	IEC 60250	2.90
Relative permittivity	Relative permittivity	23°C, 1 MHz	IEC 60250	2.80
Dissipation factor	23°C, 100 Hz	IEC 60250	1.0E-3
Dissipation factor	Dissipation factor	23°C, 1 MHz	IEC 60250	9.0E-3
Leakage Trace Index	Solution A	IEC 60112	600	V
Leakage Trace Index	Leakage Trace Index	Solution B	IEC 60112	100	V

injection	Test Result	Unit
Drying Temperature - Dry Air Dryer	130	°C
Drying time - Dry Air Dryer	2.0 到 4.0	hr
Suggested maximum moisture content	< 0.020	%
Suggested injection volume	30 到 70	%
Temperature at the rear of the barrel	315 到 325	°C
Temperature in the middle of the barrel	320 到 330	°C
Temperature at the front of the material cylinder	325 到 335	°C
Spray nozzle temperature	315 到 340	°C
Processing (melt) temperature	330 到 340	°C
Mold temperature	110 到 150	°C
Back pressure	10.0 到 20.0	Mpa
Exhaust hole depth	0.025 到 0.050	mm

Impact performance	Test Condition	Test Method	Test Result	Unit
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	无断裂
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	无断裂

hardness	Test Condition	Test Method	Test Result	Unit
Ball pressure hardness		ISO 2039-1	130	Mpa

optical performance	Test Condition	Test Method	Test Result	Unit
Refractive index 6		ISO 489	1.566
transmissivity	1000 µm	ISO 13468-2	89.0	%
Electrolytical Corrosion	23°C	IEC 60426	A1

flammability	Test Condition	Test Method	Test Result	Unit
UL flame retardant rating	1.5 mm	UL 94	HB
Burning wire flammability index		IEC 60695-2-12	800	°C
Extreme Oxygen Index 5		ISO 4589-2	25	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.