PC LEXAN™ FXE1414 WH9D279 SABIC INNOVATIVE NANSHA
103
Unit Price:$3378 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 10MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:Low temperature resistanc transparent Flame retardant
- Application Areas:Electrical appliances Electronic field Electrical field Household appliances
- Color:--
- Grade:Light diffusion level
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| 熔体质量流动速率 | 300°C/1.2kg | ASTMD1238 | 10 | g/10min |
| Shrinkage rate | MD：3.20mm | 内部方法 | 0.40to0.80 | % |
| Water absorption rate | Saturation,23°C | ISO62 | 0.35 | % |
| Equilibrium,23°C,50%RH | ISO62 | 0.15 | % | |
| Saturation, 23°C | ISO 62 | 0.35 | % | |
| Equilibrium, 23°C, 50% RH | ISO 62 | 0.15 | % | |
| Melt volume flow rate | 300°C/1.2kg | ISO1133 | 9.00 | cm3/10min |
| Melt flow rate | 300°C/1.2 kg | ASTM D1238 | 10 | g/10 min |
| Molten Volume Flow Rate (MVR) | 300°C/1.2 kg | ISO 1133 | 9.00 | cm3/10min |
| Shrinkage rate - flow | 3.20 mm | 内部方法 | 0.40 到 0.80 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Dart impact equipped with measuring instruments | 23°C, Total Energy | ASTM D3763 | 70.0 | J |
| 23°C,TotalEnergy | ASTMD3763 | 70.0 | J | |
| Bending stress | -- 5, 6 | ISO 178 | 85.0 | Mpa |
| Yield, 50.0 mm Span 4 | ASTM D790 | 92.0 | Mpa | |
| Impact strength of simply supported beam gap | -30°C | ISO 179/1eA | 65 | kJ/m² |
| 23°C | ISO 179/1eA | 70 | kJ/m² | |
| The impact strength of a simply supported beam without a notch is | -30°C | ISO 179/1eU | 无断裂 | |
| 23°C | ISO 179/1eU | 无断裂 | ||
| Unscented Izod Impact Strength | -30°C | ISO 180/1U | 无断裂 | |
| 23°C | ISO 180/1U | 无断裂 | ||
| Elongation rate | Yield | ASTMD638 | 6.0 | % |
| Tensile modulus | ASTMD638 | 2020 | Mpa | |
| Tensile strength | Break | ASTMD638 | 50.3 | Mpa |
| Yield | ASTMD638 | 55.5 | Mpa | |
| Bending modulus | 50.0mmSpan | ASTMD790 | 2230 | Mpa |
| Bending strength | Yield,50.0mmSpan | ASTMD790 | 92.4 | Mpa |
| Elongation rate | Break | ASTMD638 | 98 | % |
| Bending modulus | ISO178 | 2250 | Mpa | |
| Unscented Izod Impact Strength | -30°C | ISO180/1U | NoBreak | |
| 23°C | ISO180/1U | NoBreak | ||
| Bending strength 5, | ISO178 | 85.0 | Mpa | |
| Impact strength of simply supported beam gap | -30°C | ISO179/1eA | 65 | kJ/m² |
| 23°C | ISO179/1eA | 70 | kJ/m² | |
| The impact strength of a simply supported beam without a notch is | -30°C | ISO179/1eU | NoBreak | |
| 23°C | ISO179/1eU | NoBreak | ||
| Suspended wall beam gap impact strength | -30°C | ISO180/1A | 60 | kJ/m² |
| 23°C | ISO180/1A | 70 | kJ/m² | |
| Tensile stress | Break | ISO527-2/50 | 60.0 | Mpa |
| Yield | ISO527-2/50 | 57.0 | Mpa | |
| Tensile strain | Break | ISO527-2/50 | 120 | % |
| Yield | ISO527-2/50 | 6.0 | % | |
| Tensile strength | Yield 3 | ASTM D638 | 55.0 | Mpa |
| Yield | ISO 527-2/50 | 57.0 | Mpa | |
| Break 3 | ASTM D638 | 50.0 | Mpa | |
| Break | ISO 527-2/50 | 60.0 | Mpa | |
| Tensile modulus | -- 2 | ASTM D638 | 2020 | Mpa |
| -- | ISO 527-2/1 | 2150 | Mpa | |
| ISO527-2/1 | 2150 | Mpa | ||
| elongation | Yield 3 | ASTM D638 | 6.0 | % |
| Yield | ISO 527-2/50 | 6.0 | % | |
| Break 3 | ASTM D638 | 98 | % | |
| Break | ISO 527-2/50 | 120 | % | |
| Bending modulus | 50.0 mm Span 4 | ASTM D790 | 2230 | Mpa |
| -- 5 | ISO 178 | 2250 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Hot deformation temperature | 0.45MPa,Unannealed,3.20mm | ASTMD648 | 139 | °C |
| 1.8MPa,Unannealed,3.20mm | ASTMD648 | 124 | °C | |
| Vicat softening temperature | -- | ASTM D152510, ISO 306/B5010 | 145 | °C |
| -- | ISO 306/B120 | 146 | °C | |
| ASTMD152510 | 145 | °C | ||
| -- | ISO306/B50 | 145 | °C | |
| -- | ISO306/B120 | 146 | °C | |
| Linear coefficient of thermal expansion | MD：-40to40°C | ASTME831 | 7E-05 | cm/cm/°C |
| MD：23to80°C | ISO11359-2 | 7.2E-05 | cm/cm/°C | |
| TD：-40to40°C | ASTME831 | 7.5E-05 | cm/cm/°C | |
| TD：23to80°C | ISO11359-2 | 7.2E-05 | cm/cm/°C | |
| Flow : -40 to 40°C | ASTM E831 | 7.0E-5 | cm/cm/°C | |
| Flow : 23 to 80°C | ISO 11359-2 | 7.2E-5 | cm/cm/°C | |
| Across Flow : -40 to 40°C | ASTM E831 | 7.5E-5 | cm/cm/°C | |
| Across Flow : 23 to 80°C | ISO 11359-2 | 7.2E-5 | cm/cm/°C | |
| Hot deformation temperature | 1.8MPa,Unannealed,100mmSpan | ISO75-2/Ae | 128 | °C |
| Thermal deformation temperature under load | 0.45 MPa, Unannealed, 3.20 mm | ASTM D648 | 139 | °C |
| 1.8 MPa, Unannealed, 3.20 mm | ASTM D648 | 124 | °C | |
| 1.8 MPa, Unannealed, 4.00 mm, 100 mm Span 9 | ISO 75-2/Ae | 128 | °C |
| injection | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| drying time | 3.0 到 4.0 | hr | ||
| Suggested injection volume | 40 到 60 | % | ||
| Temperature at the rear of the barrel | 270 到 295 | °C | ||
| Temperature in the middle of the barrel | 280 到 305 | °C | ||
| Temperature at the front of the material cylinder | 295 到 315 | °C | ||
| Spray nozzle temperature | 290 到 310 | °C | ||
| Back pressure | 0.300 到 0.700 | Mpa | ||
| Screw speed | 40 到 70 | rpm | ||
| Exhaust hole depth | 0.025 到 0.076 | mm | ||
| drying temperature | 120 | °C | ||
| Suggested maximum moisture content | 0.020 | % | ||
| Processing (melt) temperature | 295 到 315 | °C | ||
| Mold temperature | 70 到 95 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top