PEEK ZYPEEK® 330G JILIN JOINATURE
221
- Unit Price:
- $56509 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 17MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:High mobility
- Application Areas:Aerospace Automotive sector
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Water absorption rate | 23℃，24hr，3.2 mm厚拉伸棒 | ISO 62-1 | 0.07 | % |
| Equilibrium，23℃ | ISO 62-1 | 0.4 | % | |
| Shrinkage rate | MD | ISO 294-4 | 1.3 | % |
| TD | ISO 294-4 | 1 | % | |
| Melt mass flow rate | 380℃，5.0kg | ISO 1133 | 80 | g/10min |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Shore hardness | 23℃ | ISO 868 | 85 | D 级 |
| Compressive strength | 23℃ | ISO 604 | 130 | Mpa |
| Tensile strain | Break，23℃ | ISO 527 | 25 | % |
| Bending modulus | 23℃ | ISO 178 | 4300 | Mpa |
| Bending strength | Yield，23℃ | ISO 178 | 175 | Mpa |
| Tensile strength | Yield，23℃ | ISO 527 | 110 | Mpa |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Dissipation factor | 23℃，1 MHz | IEC 60250 | 0.004 | |
| Dielectric constant | 23 ℃, 1 kHz | IEC 60250 | 3.2 | |
| Compared to the leakage trace index | IEC 60112 | 150 | V | |
| Dielectric strength | 2 mm | IEC 60243-1 | 23 | KV/mm |
| Volume resistivity | 275 ℃ | IEC 60093 | 10^9 | ohms·cm |
| 23 ℃，1V | IEC 60093 | 10^16 | ohms·cm |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180/A | 5 | kJ/m² | |
| Cantilever beam without notch impact strength | ISO 180/U | - | kJ/m² | |
| Impact strength of simply supported beam without notch | ISO 179/1U | - | kJ/m² | |
| Impact strength of simply supported beam gap | ISO 179-1eA | 4 | kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Thermal conductivity coefficient | 23℃ | ISO 22007-4 | 0.29 | W/m/K |
| Melting point | Tg（起始） | ISO 11357 | 143 | °C |
| Specific heat capacity | 23℃ | DSC | 2.2 | kJ/kg /℃ |
| Linear coefficient of thermal expansion | 低于Tg沿着Flow | ISO 11359 | 50 | ppm/K |
| 高于Tg沿着Flow | ISO 11359 | 120 | ppm/K | |
| Hot deformation temperature | 1.8 Mpa | ISO 75-f | 156 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.