Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | 2.00mm | 内部方法 | 0.50to0.70 | % |
| Moisture Absorption | 23°C,24hr | ISO62 | 0.10 | % |
| Outdoor Suitability | Black | UL746C | f1 | |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Flexural Stress | 23°C | ISO178 | 95.0 | Mpa |
| Nominal Tensile Strain at Break | 23°C | ISO527-2 | 13 | % |
| Tensile Stress | 屈服,23°C | ISO527-2 | 57.0 | Mpa |
| Flexural Modulus | 23°C | ISO178 | 2400 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | 1.8MPa,未退火 | ASTMD648 | 110 | °C |
| Deflection Temperature Under Load? | 1.8MPa,未退火 | ISO75-2/A | 104 | °C |
| Linear thermal expansion coefficient | MD：-30到65°C | ISO11359-2 | 7E-05 | cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric Strength | 2.00mm | IEC60243-1 | 29 | KV/mm |
| Surface Resistivity | | IEC60093 | 1E+16 | ohms |
| Dielectric Constant | 100Hz | IEC60250 | 2.90 | |
| Dielectric Constant | 1MHz | IEC60250 | 2.90 | |
| Volume Resistivity | 23°C | IEC60093 | 1E+16 | ohms·cm |
| Dissipation Factor? | 100Hz | IEC60250 | 3E-03 | |
| Dissipation Factor? | 1MHz | IEC60250 | 4E-03 | |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Charpy Notched Impact Strength | 23°C | ISO179 | 15 | kJ/m² |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 0.75mm | UL94 | V-0 | |
| UL flame retardant rating | 2.5mm | UL94 | 5VA | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices