Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | MD | ASTMD955 | 0.70 | % |
| Moisture Absorption | 24hr | ASTMD570 | 0.30 | % |
| Melt Mass-Flow Rate | 343°C/2.16kg | ASTMD1238 | 3.0to5.0 | g/10min |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Modulus | | ASTMD638 | 2480 | Mpa |
| Tensile Elongation | 断裂 | ASTMD638 | 50to100 | % |
| Flexural Modulus | | ASTMD790 | 2690 | Mpa |
| Flexural Strength | | ASTMD790 | 106 | Mpa |
| Tensile Strength | 断裂 | ASTMD638 | 70.3 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | 1.8MPa,未退火 | ASTMD648 | 174 | °C |
| Linear thermal expansion coefficient | MD | ASTMD696 | 5.6E-05 | cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric Strength | | ASTMD149 | 17 | KV/mm |
| Dissipation Factor? | 60Hz | ASTMD150 | 7E-03 | |
| Dissipation Factor? | 1kHz | ASTMD150 | 1E-03 | |
| Dissipation Factor? | 1MHz | ASTMD150 | 6E-03 | |
| Dielectric Constant | 1kHz | ASTMD150 | 3.04 | |
| Dielectric Constant | 1MHz | ASTMD150 | 3.02 | |
| Dielectric Constant | 60Hz | ASTMD150 | 3.03 | |
| Volume Resistivity | | ASTMD257 | 3E+16 | ohms·cm |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Impact Strength | | ASTMD1822 | 420 | kJ/m² |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices