Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | MD | ASTMD955 | 0.30 | % |
| Melt Mass-Flow Rate | 343°C/2.16kg | ASTMD1238 | 6.5 | g/10min |
| Density / Specific Gravity | | ASTMD792 | 1.40 | g/cm³ |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Modulus | | ASTMD638 | 6000 | Mpa |
| Tensile Elongation | 断裂 | ASTMD638 | 3.0 | % |
| Flexural Modulus | | ASTMD790 | 5520 | Mpa |
| Flexural Strength | | ASTMD790 | 148 | Mpa |
| Tensile Strength | | ASTMD638 | 96.5 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | 1.8MPa,未退火 | ASTMD648 | 180 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric Constant | 60Hz | ASTMD150 | 3.31 | |
| Dielectric Constant | 1MHz | ASTMD150 | 3.28 | |
| Volume Resistivity | | ASTMD257 | 2E+16 | ohms·cm |
| Dissipation Factor? | 60Hz | ASTMD150 | 8E-03 | |
| Dissipation Factor? | 1MHz | ASTMD150 | 6E-03 | |
| Dielectric Strength | | ASTMD149 | 19 | KV/mm |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Notched Izod Impact Strength | | ASTMD256 | 53 | J/m |
| Tensile Impact Strength | | ASTMD1822 | 109 | kJ/m² |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| Flame Rating | 3.2mm | UL94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices