Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | xflow,0.125" | ASTM D-955 | 5-7 | in/inE-3 |
| Modeling Shrinkage | flow,0.125" | ASTM D-9955 | 5-7 | in/inE-3 |
| Gloss | 无纹理,60℃ | ASTM D-523 | 90 | |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Elongation (Break) | 2.0in/min | ASTM D-638 | 25.0 | % |
| Tensile Strength (Yield) | 2.0in/min | ASTM D-638 | 8600 | psi |
| Tensile Strength (Yield) | 0.250" | ASTM D-790 | 12800 | psi |
| Notched Izod Impact Strength | -22°F | ASTM D-256 | 1.2 | ft-lb/in |
| Notched Izod Impact Strength | 73°F | ASTM D-256 | 3.2 | ft-lb/in |
| Instrumented Dart Impact | 73°F | ASTM D1646 | 330 | in-lbs |
| Instrumented Dart Impact | -22°F | ASTM D1646 | 300 | in-lbs |
| Rockwell Hardness | | ASTM D-785 | 114 | R scale |
| Flexural Modulus | 0.05in/min,2"span | ASTM D-790 | 375000 | psi |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Thermal Conductivity | | ASTM C-177 | 0.25 | W/m-c |
| Coefficient of thermal expansion | flow,0°F-300°F | ASTM E-831 | 4×10 | in/in°F |
| Coefficient of thermal expansion | xflow,0°F-300°F | ASTM E-831 | 4×10 | in/in°F |
| Thermal distortion temperature | 66Psi,0.125 | ASTM D-648 | 217 | deg°F |
| Thermal distortion temperature | 264Psi,0.125 | ASTM D-648 | 195 | deg°F |
| Physical | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt index | 标称,260℃/5.0kgf | ASTM D-1238 | 18.0 | g/10min |
| Moisture Absorption | 24小时@73°F | ASTM D-570 | 0.240 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices