Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | 2.00mm | 内部方法 | 0.50to0.70 | % |
| Moisture Absorption | 23°C,24hr | ISO62 | 0.10 | % |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Stress | 屈服,23°C | ISO527-2 | 37.0 | Mpa |
| Flexural Modulus | 23°C | ISO178 | 2350 | Mpa |
| Flexural Stress | 23°C | ISO178 | 66.0 | Mpa |
| Nominal Tensile Strain at Break | 23°C | ISO527-2 | 30 | % |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Linear thermal expansion coefficient | MD：-30到65°C | ISO11359-2 | 8E-05 | cm/cm/°C |
| Deflection Temperature Under Load? | 1.8MPa,未退火 | ASTMD648 | 76.0 | °C |
| Deflection Temperature Under Load? | 1.8MPa,未退火 | ISO75-2/A | 70.0 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Surface Resistivity | | IEC60093 | 1E+16 | ohms |
| Dielectric Constant | 100Hz | IEC60250 | 2.90 | |
| Dielectric Constant | 1MHz | IEC60250 | 2.90 | |
| Volume Resistivity | 23°C | IEC60093 | 1E+16 | ohms·cm |
| Dissipation Factor? | 100Hz | IEC60250 | 3E-03 | |
| Dissipation Factor? | 1MHz | IEC60250 | 4E-03 | |
| Dielectric Strength | 2.00mm | IEC60243-1 | 29 | KV/mm |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Charpy Notched Impact Strength | 23°C | ISO179 | 12 | kJ/m² |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 2.3mm | UL94 | V-1 | |
| UL flame retardant rating | 2.5mm | UL94 | 5VB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices