Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Density | | ASTM D792/ISO 1183 | 1.25 | |
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | Flow | ASTM D-955 | 0.35 | % |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Elongation?(Yield) | | ASTM D-638 | 2.5 | % |
| Tensile Strength(Yield) | | ASTM D-638 | 115 | Mpa |
| Tensile Elongation | | ASTM D638/ISO 527 | 2.5 | % |
| Rockwell Hardness | | ASTM D785 | 70 | |
| Rockwell Hardness | | ASTM D-785 | 70 | M-scale |
| Flexural Modulus | | ASTM D-790 | 7500 | Mpa |
| Flexural Strength | | ASTM D-790 | 185 | Mpa |
| Flexural Strength | | ASTM D790/ISO 178 | 26800 psi | kg/cm²(MPa)[Lb/in²] |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Burning Rate | | UL94 | HB | |
| Deflection Temperature Under Load? | 0.45MPa，未退火 | ASTM D-648 | 268 | °C |
| Deflection Temperature Under Load? | 1.80MPa，未退火 | ASTM D-648 | 245 | °C |
| Flame retardancy | | UL 94 | HB | |
| Linear thermal expansion coefficient | Flow | ASTM D-696 | 0.000025 | cm/cm/℃ |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric Constant | 1E+6Hz | ASTM D-150 | 2.900 | |
| Volume Resistivity | | ASTM D-257 | 1E+16 | ohm.cm |
| Volume Resistivity | | ASTM D257/IEC 60093 | 1.0E+16 | Ω.cm |
| Dissipation Factor? | 1E+6Hz | ASTM D-150 | 0.0010 | |
| Dielectric Strength | | ASTM D-149 | 48.0 | KV/mm |
| Physical | Test Condition | Test Method | Test Result | Unit |
|---|
| Moisture Absorption | 24hr | ASTM D-570 | 0.050 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices