Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Density | | ASTM D792/ISO 1183 | 1.12 | |
| Modeling Shrinkage | | ASTM D955 | 0.5-0.6 | % |
| Melt Mass-Flow Rate | | ASTM D1238/ISO 1133 | 16 | g/10min |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Modulus | | ASTM D412/ISO 527 | 2600MPA | g/cm² |
| Rockwell Hardness | | ASTM D785 | 115 | |
| Charpy impact strength | | ASTM D256/ISO 179 | 60 | kg·cm/cm(J/M)ft·lb/in |
| Charpy impact strength | | ASTM D256/ISO 179 | 26 | kg·cm/cm(J/M)ft·lb/in |
| Processing | Test Condition | Test Method | Test Result | Unit |
|---|
| Drying conditions | | | 2.0到4.0HR，80度 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices