Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | MD | ASTMD955 | 0.60 | % |
| Modeling Shrinkage | TD | ASTMD955 | 0.60 | % |
| Moisture Absorption | 24hr | ASTMD570 | 0.39 | % |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Elongation | 断裂 | ASTMD638 | 15 | % |
| Flexural Modulus | | ASTMD790 | 2450 | Mpa |
| Flexural Strength | | ASTMD790 | 118 | Mpa |
| Tensile Strength | | ASTMD638 | 77.0 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | 1.8MPa,未退火 | ASTMD648 | 203 | °C |
| Linear thermal expansion coefficient | MD:-50到150°C | ASTMD696 | 5.9E-05 | cm/cm/°C |
| Linear thermal expansion coefficient | TD:50到150°C | ASTMD696 | 6.2E-05 | cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Arc Resistance | | ASTMD495 | 80.0 | sec |
| Volume Resistivity | | ASTMD257 | 1E+16 | ohms·cm |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Unnotched Izod Impact Strength | 6.40mm | ASTMD256 | 980 | J/m |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell Hardness | R级 | ASTMD785 | 118 | |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 0.43mm | UL94 | V-0 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices