Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | MD | ASTMD955 | 1.4 | % |
| Melt Mass-Flow Rate | 230°C/2.16kg | ASTMD1238 | 2.0 | g/10min |
| Density / Specific Gravity | | ASTMD792 | 0.896 | g/cm³ |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Elongation | 屈服 | ASTMD638 | 7.0 | % |
| Flexural Modulus | | ASTMD790 | 1320 | Mpa |
| Tensile Strength | 屈服 | ASTMD638 | 26.5 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | | ASTMD648 | 92 | °C |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Unnotched Izod Impact Strength | -18°C | ASTMD256 | 1200 | J/m |
| Notched Izod Impact Strength | 23°C | ASTMD256 | 180 | J/m |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell Hardness | R级 | ASTMD785 | 83 | |
| Supplementary information | Test Condition | Test Method | Test Result | Unit |
|---|
| DropWeightImpactStrength | -29°C | 内部方法 | 31.2 | J |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices