Technical Data Sheet
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Modulus | | MPa | ASTM D638 | 2650 |
| Tensile Strength | Break | MPa | ASTM D638 | |
| Flexural Modulus | | MPa | ASTM D790 | 2900 |
| Flexural Strength | Yield | MPa | ASTM D790 | |
| Tensile Impact Strength | | kJ/m² | ASTM D1822 | |
| Tensile Elongation?(Break) | Yield | % | ASTM D638 | |
| Unnotched Izod Impact Strength | | J/m | ASTM D256 | 85.4 |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Coefficient of Linear Thermal Expansion | flow | cm/cm/°C | ASTM D696 | |
| Deflection Temperature Under Load? | 1.8Mpa,未退火 | ℃ | ASTM D648 | 204 |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric Constant | 60 Hz | | ASTM D150 | |
| Dielectric Constant | 1000 Hz | | ASTM D150 | |
| Dielectric Constant | 1E+6 Hz | | ASTM D150 | |
| Volume Resistivity | | ohm·cm | ASTM D257 | |
| Dielectric Strength | | kV/mm | ASTM D149 | |
| Dissipation Factor? | 60 Hz | | ASTM D150 | |
| Dissipation Factor? | 1000 Hz | | ASTM D150 | |
| Dissipation Factor? | 1E+6 Hz | | ASTM D150 | |
| Other | Test Condition | Test Method | Test Result | Unit |
|---|
| Flame Rating | 1.50 mm | | UL 94 | V-0 |
| Relative Temperature Index | 1.57 mm | ℃ | UL 746 | 180 |
| Relative Temperature Index | 0.787mm | ℃ | UL 746 | 180 |
| Physical | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | flow | % | ASTM D955 | 0.60 |
| Moisture Absorption | 24hr | % | ASTM D570 | 0.54 |
| Melt index | 3.20mm | g/10 min | ASTM D1238 | |
| Density | | g/cm³ | ASTM D792 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices