Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | MD：3.20mm | ASTMD955 | 0.40到0.70 | % |
| Melt Mass-Flow Rate | 220°C/10.0kg | ASTMD1238 | 3.0 | g/10min |
| Density / Specific Gravity | | ASTMD792 | 1.06 | g/cm³ |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Flexural Modulus | 3.20mm | ASTMD790 | 2550 | Mpa |
| Tensile Elongation | 断裂,3.20mm | ASTMD638 | 20 | % |
| Flexural Strength | 屈服,3.20mm | ASTMD790 | 78.5 | Mpa |
| Tensile Strength | 屈服,3.20mm | ASTMD638 | 49.0 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Vicat Softening Temperature | | ASTMD15255 | 116 | °C |
| RTIElec | | UL746 | 60.0 | °C |
| Evolution Calendar intelligent importer | | UL746 | 60.0 | °C |
| Deflection Temperature Under Load? | 0.45MPa,未退火,6.40mm | ASTMD648 | 115 | °C |
| Deflection Temperature Under Load? | 1.8MPa,未退火,6.40mm | ASTMD648 | 106 | °C |
| RTI | | UL746 | 60.0 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| | ASTMD257 | 1.5E+03 | ohms·cm |
| | IEC60093 | 1E+15 | ohms·cm |
| | IEC60243-1 | 33 | KV/mm |
| Arc Resistance | | ASTMD495 | PLC6 | |
| Comparative Tracking Index | CTI)6 | UL746 | PLC0 | |
| | ASTMD149 | 33 | KV/mm |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Notched Izod Impact Strength | 23°C,3.20mm | ASTMD256 | 180 | J/m |
| Notched Izod Impact Strength | 23°C,6.40mm | ASTMD256 | 170 | J/m |
| Notched Izod Impact Strength | -30°C,3.20mm | ASTMD256 | 78 | J/m |
| Notched Izod Impact Strength | -30°C,6.40mm | ASTMD256 | 69 | J/m |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell Hardness | R级 | ASTMD785 | 111 | |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | | UL94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices