Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Density | | ASTM D792/ISO 1183 | 0.918 | |
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Gloss | 45℃ | ASTM D-2457 | 50 | |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Modulus (Break 1% Secant) | MD | ASTM D-882 | 195 | Mpa |
| Tensile Modulus (Break 1% Secant) | TD | ASTM D-882 | 220 | Mpa |
| MD，25µm | ASTM D-882 | 31 | Mpa |
| TD，25µm | ASTM D-882 | 23 | Mpa |
| Puncture | | Equate | 60 | J/mm |
| Dart Drop Impact | F | ASTM D-1709A | 85 | gms |
| Tensile Elongation | MD | ASTM D-882 | 450 | % |
| Tensile Elongation | TD | ASTM D-882 | 600 | % |
| Physical | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt index | 190℃,2.16kg | ASTM D-1283 | 2 | g/10min |
| Density | | ASTM D-1505 | 0.918 | g/cm |
| Other performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Solvents | | ASTM D-1003 | 14 | % |
| | Equate | narrow | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare