Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | TD | ISO294-4 | 1.4 | % |
| Modeling Shrinkage | MD | ISO294-4 | 1.4 | % |
| Moisture Absorption | 平衡,23°C,50%RH | ISO15512 | 0.30 | % |
| Relative Viscosity | | ISO307 | 2.7 | |
| Density / Specific Gravity | | ISO1183 | 1.14 | g/cm³ |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Flexural Stress | 23°C | ISO178 | 100 | Mpa |
| Tensile Stress | 屈服,23°C | ISO527-2 | 86.0 | Mpa |
| Tensile Modulus | 23°C | ISO527-2 | 3100 | Mpa |
| Flexural Modulus | 23°C | ISO178 | 2700 | Mpa |
| Nominal Tensile Strain at Break | 23°C | ISO527-2 | 25 | % |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | 0.45MPa,未退火 | ISO75-2/B | 200 | °C |
| Deflection Temperature Under Load? | 1.8MPa,未退火 | ISO75-2/A | 70.0 | °C |
| Melting temperature | | ISO11357-3 | 260 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Surface Resistivity | | IEC60093 | 1E+12 | ohms |
| Volume Resistivity | 2.00mm | IEC60093 | 1E+14 | ohms·cm |
| Dielectric Strength | 1.00mm | IEC60243-1 | 32 | KV/mm |
| Comparative Tracking Index | 3.00mm | IEC60112 | >600 | V |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Notched Izod Impact Strength | 23°C | ISO180 | 4.0 | kJ/m² |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell Hardness | R计秤,23°C | ISO2039-2 | 120 | |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| The Yellow Index | | ASTMD1925 | -3.3 | YI |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | | UL94 | V-2 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices