PET Rynite® FR530 NC010 DUPONT USA
261
- Properties:enhanceGlass fiber reinforcedwear resistantHigh rigidityHigh temperature resistan
- Usages:Electrical fieldElectronic fieldHousehold appliancesHousehold appliancesAutomotive sector
- Certificates:UL
Compare
View PricesTechnical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Density | ASTM D792/ISO 1183 | 1680 | ||
| Modeling Shrinkage | ASTM D955 | 0.8 | % |
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Modeling Shrinkage (Flow) | 3.20 mm | ASTM D955 | 0.0025 | cm/cm |
| Modeling Shrinkage (Across Flow) | 3.20 mm | ASTM D955 | 0.0075 | cm/cm |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile Elongation?(Break) | ASTM D638 | 2.1 | % | |
| Notched Izod Impact Strength | ASTM D256 | 80 | J/m | |
| Notched Impact Strength | ASTM D256 | 91 | J/m | |
| Unnotched Izod Impact Strength | ASTM D256 | 585 | J/m | |
| Tensile Strength | ASTM D695 | 200 | Mpa | |
| Tensile Modulus | ASTM D412/ISO 527 | 11500 | kg/cm²(MPa)[Lb/in²] | |
| ASTM D638 | 11000 | Mpa | ||
| 23℃，注塑 | MPa | ISO 527-1,-2 | 11500 | |
| Tensile Strength | ASTM D638 | 138 | Mpa | |
| Flexural Modulus | ASTM D790 | 10300 | Mpa | |
| ASTM D790/ISO 178 | 10500 | kg/cm²(MPa)[Lb/in²] | ||
| 23℃,压缩模塑 | MPa | ISO 178 | 10500 | |
| Flexural Strength | ASTM D790/ISO 178 | 200 | kg/cm²(MPa)[Lb/in²] | |
| ASTM D790 | 200 | Mpa | ||
| 23℃ | MPa | ISO 178 |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Burning Rate | UL94 | V-0 | ||
| Deflection Temperature Under Load? | ASTM D648/ISO 75 | 243 | ℃（℉） | |
| ASTM D648/ISO 75 | 225 | ℃（℉） | ||
| 66 psi， 未退火 | ASTM D648 | 246 | °C | |
| 264 psi，未退火 | ASTM D648 | 224 | °C | |
| Melting Temperature | 254 | °C | ||
| 252 | ℃（℉） | |||
| UL flame retardant rating | 0.900mm | UL94 | V-0 | |
| 1.50mm | UL94 | V-0 | ||
| 0.750mm | UL94 | V-0 | ||
| 0.900mm | UL94 | 5VA | ||
| 0.350mm | UL94 | V-0 | ||
| 3.00mm | UL94 | V-0 | ||
| 2.00mm | UL94 | V-0 | ||
| Coefficient of Linear Thermal Expansion (Flow) | ASTM E831 | 0.000019 | cm/cm/ ℃ | |
| Oxygen Index | ASTM D2863 | 33 | % | |
| Flame Rating | UL 94 | V-0 |
| Physical | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Density | g/cm³ | ISO 1183 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
