PBT VALOX™ V3900WX SABIC INNOVATIVE US
189
- Properties:High impactLow warpageDimensional stabilityHigh toughnessWeather resistance
- Usages:Charging stationWire and cableElectronic and electricalAutomotive sectorCommunication equipmentLighting applications
- Certificates:UL
Compare
View PricesTechnical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Moisture Absorption | 23°C/sat | ISO 62 | 0.1 | |
| 23°C / 50 | ISO 62 | 0.03 | ||
| Melt Mass-Flow Rate (266°C 5kg) | ASTM D1238 | 35 | g/10min | |
| Melt Volume flow Rate (265°C/2.16 kg) | ISO 1133 | 11 | cm³/10 min | |
| Modeling Shrinkage(Across Flow) | flow, 3.2 | Internal | 0.7~1 |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile Strength(Yield) | Type I, 50 | ASTM D638 | 53 | |
| 50 mm/m | ISO 527 | 51 | ||
| Internal | 48 | |||
| Tensile Strength(Break) | 50 mm/m | ISO 527 | 40 | |
| Type I, 50 | ASTM D638 | 43 | ||
| Tensile Elongation (Break) | ASTM D638 | 250 | ||
| Type I, 50 | ASTM D638 | 50 | ||
| 50 mm/m | ISO 527 | 42 | ||
| Tensile Modulus | 5 mm/mi | ASTM D638 | 2200 | |
| 1 mm/mi | ISO 527 | 2090 | ||
| Flexural Modulus | 1.3 mm/m | ASTM D790 | 2200 | |
| 2 mm/m | ISO 178 | 2130 | ||
| Tensile Strength(Yield) | 1.3 mm | ASTM D790 | 80 | |
| 2 mm/m | ISO 178 | 73 | ||
| Tensile Elongation (Yield) | Type I, 50 | ASTM D638 | 5 | |
| 50 mm/m | ISO 527 | 4 |
| Flammability Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Flame Rating | UL94 | 1.5 | ||
| Flame Rating （5VA） | UL94 | 3 | ||
| Glow Wire Flammability Index | IEC 60695-2-12 | 960 | passes at |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | V-notch | 52 | kJ/m² | |
| Notched Izod Impact Strength 23℃ | ASTM D256 | 800 | ||
| 80*10*4 | ISO 180/1A | 45 | kJ/m² | |
| Instrumented Dart Impact (23℃) | ASTM D3763 | 50 | ||
| Notched Izod Impact Strength (23℃) | ASTM D256 | 110 | ||
| 80*10*4 | ISO 180/1A | 8 | kJ/m² | |
| Instrumented Dart Impact (-40℃) | ASTM D3763 | 50 |
| Electrical Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Glow Wire Flammability Index | IEC 60695-2-12 | 960 | passes | |
| Glow Wire Ignition Temperature | IEC 60695-2-13 | 825 | ||
| IEC 60695-2-13 | 725 | by VDE | ||
| UL 746C | F1 |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Relative Temperature Index | UL 746B | 120 | °C | |
| UL 746B | 120 | °C | ||
| UL 746B | 120 | °C | ||
| Vicat Softening Temperature | Rate B/50 | ASTM D1525 | 105 | °C |
| Rate B/5 | ISO 306 | 123 | °C | |
| Rate B/5 | ISO 306 | 121 | °C | |
| Coefficient of Linear Thermal Expansion(Flow) | -40°C to 4 | ASTM E831 | 88.4 E-6 | °C |
| -40°C to 4 | ISO 11359-2 | 88.4 E-6 | °C | |
| Coefficient of Linear Thermal Expansion(Across Flow) | -40°C to 4 | ASTM E831 | 89.7 E-6 | °C |
| -40°C to 4 | ISO 11359-2 | 89.7 E-6 | °C | |
| Ball Indentation Temperature | Pass | IEC 60695-10-2 | 75 | °C |
| Pass | IEC 60695-10-2 | 125 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
