Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | TD | ISO294-4 | 0.86 | % |
| Modeling Shrinkage | MD | ISO294-4 | 0.82 | % |
| Moisture Absorption | 饱和,23°C | ISO62 | 2.2 | % |
| Moisture Absorption | 平衡,23°C,50%RH | ISO62 | 0.80 | % |
| Melt Volume flow Rate | 360°C/10.0kg | ISO1133 | 70.0 | cm3/10min |
| Density / Specific Gravity | | ISO1183 | 1.37 | g/cm³ |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Modulus | 23°C | ISO527-2 | 2650 | Mpa |
| Tensile Stress | 屈服,23°C | ISO527-2 | 85.0 | Mpa |
| Tensile Strain | 屈服,23°C | ISO527-2 | 6.9 | % |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| RTIElec | 1.6mm | UL746 | 180 | °C |
| RTIElec | 3.0mm | UL746 | 180 | °C |
| Evolution Calendar intelligent importer | 1.6mm | UL746 | 180 | °C |
| Evolution Calendar intelligent importer | 3.0mm | UL746 | 180 | °C |
| RTIStr | 1.6mm | UL746 | 190 | °C |
| RTIStr | 3.0mm | UL746 | 190 | °C |
| Deflection Temperature Under Load? | 1.8MPa,未退火 | ISO75-2/A | 205 | °C |
| Linear thermal expansion coefficient | MD | | 5.2E-05 | cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric Strength | | IEC60243-1 | 37 | KV/mm |
| Comparative Tracking Index | | IEC60112 | 125 | V |
| Surface Resistivity | | IEC60093 | >1.0E+15 | ohms |
| Dielectric Constant | 100Hz | IEC60250 | 3.90 | |
| Dielectric Constant | 1MHz | IEC60250 | 3.80 | |
| Volume Resistivity | | IEC60093 | >1.0E+13 | ohms·cm |
| Dissipation Factor? | 100Hz | IEC60250 | 1.7E-03 | |
| Dissipation Factor? | 1MHz | IEC60250 | 0.014 | |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Charpy Unnotched Impact Strength | -30°C | ISO179 | NoBreak | |
| Charpy Unnotched Impact Strength | 23°C | ISO179 | NoBreak | |
| Charpy Notched Impact Strength | -30°C | ISO179 | 7.5 | kJ/m² |
| Charpy Notched Impact Strength | 23°C | ISO179 | 7.0 | kJ/m² |
| Notched Izod Impact Strength | -30°C | ISO180 | 7.5 | kJ/m² |
| Notched Izod Impact Strength | 23°C | ISO180 | 7.0 | kJ/m² |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Ball Indentation Hardness | | ISO2039-1 | 154 | Mpa |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 1.6mm | UL94 | V-0 | |
| UL flame retardant rating | 3.0mm | UL94 | V-0 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices