Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | 流动方向，500bar | ISO 2577 | 0.4-0.6 | % |
| Modeling Shrinkage | 垂直流动方向，500bar | ISO 2577 | 0.4-0.6 | % |
| Melt index | 240℃ | ISO 1133 | 20 | CM |
| Spiral Flow | 260℃，2×8.7mm | | 380 | mm |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Elongation?(Break) | 50mm/min | ISO 527 | >50 | % |
| Tensile Stress (Yield) | 50mm/min | ISO 527 | 4 | % |
| Tensile Stress (Yield) | 50mm/min | ISO 527 | 60 | Mpa |
| IZOD Notch Impact Strength | -30℃ | ISO 180-1A | 15 | KJ/m |
| IZOD Notch Impact Strength | 23℃ | ISO 180-1A | 50 | KJ/m |
| Tensile Modulus | 1mm/min | ISO 527 | 2600 | Mpa |
| Tensile Strength | 50mm/min | ISO 527 | 50 | Mpa |
| Izod Impact Strength | 23℃ | ISO 180-1U | N | KJ/m |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | 1.80MPa | ISO 75 | 90 | °C |
| Deflection Temperature Under Load? | 0.45MPa | ISO 75 | 100 | °C |
| Vicat Softening Temperature | 50N;50K/h | ISO 306 | 108 | °C |
| Coefficient of Linear Thermal Expansion | 流动方向，23至55℃ | ASTM E 831 | 0.76 | |
| Coefficient of Linear Thermal Expansion | 垂直流动方向，23至55℃ | ASTM E 831 | 0.80 | |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric Constant | 1MHZ | IEC 250 | 3.1 | |
| Dielectric Constant | 100HZ | IEC 250 | 3.2 | |
| Surface Resistivity | | IEC 93 | 1E+14 | Ω |
| Volume Resistivity | | IEC 93 | 1E+15 | Ω.m |
| Dielectric Strength | | IEC 243-1 | 30 | KV/mm |
| Dissipation Factor? | 1MHZ | IEC 250 | 80 | 0.0001 |
| Dissipation Factor? | 100HZ | IEC 250 | 30 | 0.0001 |
| Arc Resistance | 溶液A | IEC 112 | 500 | 等级 |
| Processing | Test Condition | Test Method | Test Result | Unit |
|---|
| Injection Rate | | ISO 294 | 240 | mm/s |
| Melt Temperature | | ISO 294 | 240 | °C |
| Mold Temperature | | ISO 294 | 80 | °C |
| Other | Test Condition | Test Method | Test Result | Unit |
|---|
| Hygroscopicity | 23℃/50%相对湿度 | ISO 62 | 0.2 | % |
| Moisture Absorption | 23℃饱和吸水 | ISO 62 | 0.5 | % |
| Physical | Test Condition | Test Method | Test Result | Unit |
|---|
| Density / Specific Gravity | | ISO 1183 | 1190 | kg/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices