Technical Data Sheet
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Notched Izod Impact Strength | 23℃，3.2mm 23℃，3.18 mm | ASTM D256 | 44 | J/m |
| Test Condition | Test Method | Test Result | Unit |
|---|
| Melt Mass-Flow Rate | 230℃，2.16kg 230℃/2.16 kg | ASTM D1238 | 50 | g/10min |
| Modeling Shrinkage | MD：23℃ MD，23℃ | 内部方法 | 1.5 到 2.0 | % |
| Density | | ASTM D792 | 0.898 | g/cm³ |
| Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Strength | 屈服，23℃ 屈服，23℃ | ASTM D638 | 30 | Mpa |
| Tensile Strain | 断裂，23℃ 断裂，23℃ | ASTM D638 | > 200 | % |
| Flexural Modulus | 23℃ 23℃ | ASTM D790-A | 1130 | Mpa |
| Rockwell Hardness | R 级 R 级，23℃ | ASTM D785 | 95 | |
| Thermal | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | 1.8 MPa，未退火，6.35 mm 1.8 MPa，未退火，6.35 mm | ASTM D648 | 95 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare