Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Moisture Absorption | | ASTM D-570 | 0.1 | % |
| Modeling Shrinkage | 3.2mm | ASTM D-955 | 4-6 | E-3 |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Elongation rate | 断裂点 | ASTM D-638 | 50 | % |
| Tensile Modulus | | ASTM D-638 | 2687 | Mpa |
| Tensile Strength | 屈伏点 | ASTM D-638 | 59 | Mpa |
| Rockwell Hardness | | ASTM D-785 | 120 | R |
| Flexural Modulus | | ASTM D-790 | 2687 | Mpa |
| Flexural Strength | | ASTM D-790 | 96 | Mpa |
| Notched Impact Strength | 23℃ | ASTM D-256 | 427 | J/m |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| UL Long-Term Service Temperature | 无冲击 | UL-746B | 60 | °C |
| UL Long-Term Service Temperature | 含冲击 | UL-746B | 60 | °C |
| Deflection Temperature Under Load? | 0.45Mpa | ASTM D-648 | - | °C |
| Deflection Temperature Under Load? | 1.8Mpa | ASTM D-648 | 80 | °C |
| Vicat Softening Temperature | | ASTM D-1525 | 90 | °C |
| Flame retardancy | | UL-94 | 1.5 | mm |
| Flame retardancy | | UL-94 | V-0 | |
| Coefficient of Linear Thermal Expansion | | E-831 | - | 1/℃ |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Volume Resistivity | | ASTM D-257 | 1E+17 | ohm-cm |
| Loss factor | 1MHz | ASTM D-150 | - | |
| Surface resistance | | ASTM D257 | 1E+14 | ohm-cm |
| Dielectric Constant | 1MHz | ASTM D-150 | - | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices