Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | TD | ISO294-4 | 1.8 | % |
| Modeling Shrinkage | MD | ISO294-4 | 2.0 | % |
| Melt Mass-Flow Rate | 190°C/2.16kg | ISO1133 | 2.5 | g/10min |
| Density / Specific Gravity | | ISO1183 | 1.40 | g/cm³ |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Creep Modulus | 1000hr | ISO899-1 | 1500 | Mpa |
| Tensile Stress | 屈服 | ISO527-2 | 70.0 | Mpa |
| Tensile Strain | 屈服 | ISO527-2 | 18 | % |
| Tensile Modulus | | ISO527-2 | 3000 | Mpa |
| Flexural Modulus | | ISO178 | 2800 | Mpa |
| Tensile Creep Modulus | 1hr | ISO899-1 | 2700 | Mpa |
| Nominal Tensile Strain at Break | | ISO527-2 | 45 | % |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | 0.45MPa,未退火 | ISO75-2/B | 163 | °C |
| Deflection Temperature Under Load? | 1.8MPa,未退火 | ISO75-2/A | 97.0 | °C |
| Melting Temperature | | ISO11357-3 | 178 | °C |
| Linear thermal expansion coefficient | MD | ISO11359-2 | 1.1E-04 | cm/cm/°C |
| Linear thermal expansion coefficient | TD | ISO11359-2 | 1.1E-04 | cm/cm/°C |
| Annealing Temperature | | | 160 | °C |
| Annealing Time-Optional | | | 30.0 | min/mm |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Charpy Notched Impact Strength | -30°C | ISO179/1eA | 7.0 | kJ/m² |
| Charpy Notched Impact Strength | 23°C | ISO179/1eA | 9.0 | kJ/m² |
| Notched Izod Impact Strength | 23°C | ISO180/1A | 8.0 | kJ/m² |
| Charpy Unnotched Impact Strength | -30°C | ISO179/1eU | 170 | kJ/m² |
| Charpy Unnotched Impact Strength | 23°C | ISO179/1eU | 250 | kJ/m² |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 0.8mm | UL94 | HB | |
| UL flame retardant rating | 1.5mm | UL94 | HB | |
| UL flame retardant rating | 0.8mm | IEC60695-11-10,-20 | HB | |
| UL flame retardant rating | 1.5mm | IEC60695-11-10,-20 | HB | |
| FMVSS Flammability | | FMVSS302 | B | |
| Fogging-G-value | condensate | ISO6452 | 1E-04 | g |
| Burning Rate | 1.00mm | ISO3795 | 26 | mm/min |
| Supplementary information | Test Condition | Test Method | Test Result | Unit |
|---|
| Emission | | VDA275 | <8.00 | mg/kg |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices