Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt Mass-Flow Rate | 230°C/2.16 kg | ASTM D1238 | 1.6 | g/10 min |
| Modeling Shrinkage - Flow | 23°C | 内部方法 | 1.5 到 2.0 | % |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Elongation | 断裂, 23°C | ASTM D638 | > 200 | % |
| Flexural Modulus | 23°C | ASTM D790A | 833 | Mpa |
| Tensile Strength | 屈服, 23°C | ASTM D638 | 25.0 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | 1.8 MPa, 未退火, 6.35 mm | ASTM D648 | 85.0 | °C |
| Injection | Test Condition | Test Method | Test Result | Unit |
|---|
| Injection Pressure | | | 3.92 到 8.83 | Mpa |
| Processing (Melt) Temp | | | 220 到 240 | °C |
| Mold Temperature | | | 30 到 50 | °C |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell Hardness | R 级, 23°C | ASTM D785 | 85 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices