Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | | ASTM D-955 | 5-7 | in/inE-3 |
| Taber wear | | ASTM D-1044 | 10 | mg/1000次 |
| Solid Content | | ASTM D-792 | 1.27 | |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Strength (Yield) | | ASTM D-790 | 22000 | psi |
| Tensile Elongation?(Yield) | | ASTM D-638 | 7.0 | % |
| IZOD Notch Impact Strength | | ASTM D-256 | 0.6 | ft-lb/in |
| Flexural Modulus | | ASTM D-790 | 480000 | psi |
| Unnotched Izod Impact Strength | | ASTM D-4812 | 25.0 | ft-lb/in |
| Tensile Elongation (Break) | | ASTM D-638 | 60.0 | % |
| Tensile Strength (Yield) | | ASTM D-638 | 15200 | psi |
| Rockwell Hardness | | ASTM D-785 | 109 | psi |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | 264Psi | ASTM D-648 | 387 | ℉ |
| Deflection Temperature Under Load? | 66Psi | ASTM D-648 | 405 | ℉ |
| Vicat Softening Temperature | | ASTM D-1525 | 426 | ℉ |
| Flammability | | UL 94 | V-0 | CLASS |
| Temperature Index | 电性能 | UL746B | 170 | °C |
| Temperature Index | 机械冲击性能 | UL746B | 170 | °C |
| Temperature Index | 非机械性能 | UL746B | 170 | °C |
| Coefficient of Linear Thermal Expansion | flow | ASTM E-831 | 3 | E-5/in/in℉ |
| Coefficient of Linear Thermal Expansion | xflow | ASTM E-831 | - | E-5/in/in℉ |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Loss factor | 1KHz | ASTM D-150 | 0.0013 | |
| Dielectric Strength | 62mils | ASTM D-149 | 830 | v/mil |
| Dielectric Constant | 1KHz | ASTM D-150 | 3.15 | |
| Volume Resistivity | | ASTM D-257 | 1×10 | Ω.cm |
| Physical | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt index | | ASTM D-1238 | 17.8 | g/10min |
| Moisture Absorption | 平衡,73℉ | ASTM D-570 | 1.25 | % |
| Moisture Absorption | 24小时，73℉ | ASTM D-570 | 0.250 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices