PC Makrolon® 2405 BK COVESTRO SHANGHAI

254

Properties:
Low viscosity
Usages:
Electrical field
Electronic field
Industrial applications
Automotive sector
currency
currency
Certificates:
UL
Compare
View Prices

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Modeling Shrinkage	TD:2.00mm3	ISO294-4	0.70	%
	Modeling Shrinkage	MD:2.00mm3	ISO294-4	0.65	%
		Modeling Shrinkage	TD	ISO2577	0.50to0.70	%
		Modeling Shrinkage	Modeling Shrinkage	MD	ISO2577	0.50to0.70	%
Moisture Absorption	饱和,23°C	ISO62	0.30	%
Moisture Absorption	Moisture Absorption	平衡,23°C,50%RH	ISO62	0.12	%
Melt Mass-Flow Rate	300°C/1.2kg	ISO1133	20	g/10min
Melt Volume flow Rate	300°C/1.2kg	ISO1133	19.0	cm3/10min
Density / Specific Gravity	23°C	ISO1183	1.20	g/cm³
Apparent Density		ISO60	0.66	g/cm³

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Nominal Tensile Strain at Break	23°C	ISO527-2/50	>50	%
Tensile Creep Modulus	1hr	ISO899-1	2200	Mpa
Tensile Stress	屈服,23°C	ISO527-2/50	65.0	Mpa
Tensile Stress	Tensile Stress	断裂,23°C	ISO527-2/50	65.0	Mpa
Tensile Strain	屈服,23°C	ISO527-2/50	6.0	%
Tensile Strain	Tensile Strain	断裂,23°C	ISO527-2/50	130	%
Tensile Creep Modulus	1000hr	ISO899-1	1900	Mpa
Tensile Modulus	23°C	ISO527-2/1	2400	Mpa
Flexural Stress	3.5%Strain,23°C	ISO178	73.0	Mpa
Flexural Stress	Flexural Stress	23°C	ISO178	97.0	Mpa
Flexural Modulus	23°C	ISO178	2350	Mpa
Flexural Strain	23°C	ISO178	7.1	%

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Glass Transition Temperature		ISO11357-2	144	°C
Thermal Conductivity	23°C	ISO8302	0.20	W/m/K
Deflection Temperature Under Load?	0.45MPa,未退火	ISO75-2/B	137	°C
Deflection Temperature Under Load?	Deflection Temperature Under Load?	1.8MPa,未退火	ISO75-2/A	124	°C
RTIElec	1.5mm	UL746	125	°C
Evolution Calendar intelligent importer	1.5mm	UL746	115	°C
RTIStr	1.5mm	UL746	125	°C
Linear thermal expansion coefficient	MD：23到55°C	ISO11359-2	6.5E-05	cm/cm/°C
Linear thermal expansion coefficient	Linear thermal expansion coefficient	TD：23to55°C	ISO11359-2	6.5E-05	cm/cm/°C
Vicat Softening Temperature	--	ISO306/B50	145	°C
Vicat Softening Temperature	Vicat Softening Temperature	--	ISO306/B120	146	°C
Ball PressureTest	136°C	IEC60695-10-2	Pass

Electrical performance	Test Condition	Test Method	Test Result	Unit
Dielectric Strength	23°C,1.00mm	IEC60243-1	34	KV/mm
Dissipation Factor?	23°C,100Hz	IEC60250	5E-04
Dissipation Factor?	Dissipation Factor?	23°C,1MHz	IEC60250	9E-03
Relative Permittivity	23°C,100Hz	IEC60250	3.10
Relative Permittivity	Relative Permittivity	23°C,1MHz	IEC60250	3.00
Comparative Tracking Index	解决方案A	IEC60112	250	V
Comparative Tracking Index	Comparative Tracking Index	解决方案B	IEC60112	125	V
Surface Resistivity		IEC60093	1E+16	ohms
Volume Resistivity	23°C	IEC60093	1E+16	ohms·cm

Film	Test Condition	Test Method	Test Result	Unit
WaterVaporTransmissionRate	23°C,85%RH,100µm	ISO15106-1	15	g/m²/24hr
Gas Permeation	CarbonDioxide:23°C,25.4µm	ISO2556	18900	cm³/m²/bar/24hr
	Gas Permeation	CarbonDioxide:23°C,100.0µm	ISO2556	4000	cm³/m²/bar/24hr
		Gas Permeation	Nitrogen:23°C,25.4µm	ISO2556	630	cm³/m²/bar/24hr
			Gas Permeation	Nitrogen:23°C,100.0µm	ISO2556	130	cm³/m²/bar/24hr
				Gas Permeation	Oxygen:23°C,25.4µm	ISO2556	3150	cm³/m²/bar/24hr
				Gas Permeation	Gas Permeation	Oxygen:23°C,100.0µm	ISO2556	700	cm³/m²/bar/24hr

Impact Properties	Test Condition	Test Method	Test Result	Unit
Charpy Notched Impact Strength	-30°C,完全断裂	ISO7391	14	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C,局部断裂	ISO7391	65	kJ/m²
Notched Izod Impact Strength	-30°C,完全断裂	ISO7391	15	kJ/m²
Notched Izod Impact Strength	Notched Izod Impact Strength	23°C,局部断裂	ISO7391	65	kJ/m²
Multi-Axial Instrumented Impact Peak Force	-30°C	ISO6603-2	6000	N
Multi-Axial Instrumented Impact Peak Force	Multi-Axial Instrumented Impact Peak Force	23°C	ISO6603-2	5100	N
Charpy Unnotched Impact Strength	-60°C	ISO179/1eU	NoBreak
	Charpy Unnotched Impact Strength	-30°C	ISO179/1eU	NoBreak
	Charpy Unnotched Impact Strength	Charpy Unnotched Impact Strength	23°C	ISO179/1eU	NoBreak
Multi-Axial Instrumented Impact Energy	-30°C	ISO6603-2	65.0	J
Multi-Axial Instrumented Impact Energy	Multi-Axial Instrumented Impact Energy	23°C	ISO6603-2	55.0	J

hardness	Test Condition	Test Method	Test Result	Unit
Ball Indentation Hardness		ISO2039-1	115	Mpa

optical performance	Test Condition	Test Method	Test Result	Unit
		ISO489	1.585
Transmittance	3000µm	ISO13468-2	88.0	%
	Transmittance	4000µm	ISO13468-2	87.0	%
		Transmittance	1000µm	ISO13468-2	89.0	%
		Transmittance	Transmittance	2000µm	ISO13468-2	89.0	%
Haze	3000µm	ISO14782	<0.80	%

Flammability	Test Condition	Test Method	Test Result	Unit
ApplicationofFlamefromSmallBurner MethodKandF	2.00mm	DIN53438-1,-3	K1,F1
FMVSS Flammability	>1.00mm	ISO3795	passed
FlashIgnition		ASTMD1929	480	°C
Needle Flame Test	MethodF:1.50mm	IEC60695-11-5	1.0	min
	Needle Flame Test	MethodF:2.00mm	IEC60695-11-5	2.0	min
		Needle Flame Test	MethodF:3.00mm	IEC60695-11-5	2.0	min
			Needle Flame Test	MethodK:1.50mm	IEC60695-11-5	0.1	min
				Needle Flame Test	MethodK:2.00mm	IEC60695-11-5	0.1	min
				Needle Flame Test	Needle Flame Test	MethodK:3.00mm	IEC60695-11-5	0.2	min
Oxygen Index		ISO4589-2	27	%
SelfIgnition		ASTMD1929	550	°C
UL flame retardant rating	2.7mm	UL94	HB
	UL flame retardant rating	0.36mm	UL94	V-2
	UL flame retardant rating	UL flame retardant rating	0.75mm	UL94	V-2
Glow Wire Flammability Index	0.75mm	IEC60695-2-12	850	°C
	Glow Wire Flammability Index	1.5mm	IEC60695-2-12	875	°C
	Glow Wire Flammability Index	Glow Wire Flammability Index	3.0mm	IEC60695-2-12	930	°C
Glow Wire Ignition Temperature	0.75mm	IEC60695-2-13	875	°C
	Glow Wire Ignition Temperature	1.0mm	IEC60695-2-13	875	°C
		Glow Wire Ignition Temperature	1.5mm	IEC60695-2-13	875	°C
		Glow Wire Ignition Temperature	Glow Wire Ignition Temperature	3.0mm	IEC60695-2-13	875	°C

Supplementary information	Test Condition	Test Method	Test Result	Unit
ISO Shortname			ISO7391-PC,MR,(,,)-18-9
ElectrolyticalCorrosion	23°C	IEC60426	A1

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

PC Makrolon® 2405 BK COVESTRO SHANGHAI

Technical Data Sheet

You May Like