Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt index | 2.16kg@380℃ | g/10min | ASTM D1238 | 16-25 |
| Modeling Shrinkage | MD | ASTMD955 | 0.60 | % |
| Moisture Absorption | 24hr | ASTMD570 | 0.50 | % |
| Moisture Absorption | 24小时 | % | ASTM D570 | |
| Melt Mass-Flow Rate | 380°C/2.16kg | ASTMD1238 | 30 | g/10min |
| Moisture Absorption | | ASTMD570 | 1.9 | % |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Strength (Break) | 23℃ | % | ASTM D638 | |
| Tensile Strength | | ASTMD638 | 88.9 | Mpa |
| IZOD Notch Impact Strength | 23℃ | J/m | ASTM D256 | 53.4 |
| Tensile Modulus | | ASTMD638 | 2690 | Mpa |
| Tensile Modulus | 23℃ | MPa | ASTM D638 | |
| Tensile Strength | 23℃ | MPa | ASTM D638 | 88.9 |
| Tensile Elongation | 屈服 | ASTMD638 | 6.5 | % |
| Flexural Modulus | | ASTMD790 | 2620 | Mpa |
| Flexural Modulus | 23℃ | MPa | ASTM D790 | |
| Flexural Strength | 23℃ | MPa | ASTM D790 | 114 |
| Flexural Strength | | ASTMD790 | 125 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | 1.8MPa,退火 | ASTMD648 | 200 | °C |
| Deflection Temperature Under Load? | 1.82MPa | ℃ | ASTM D648 | 195 |
| Linear thermal expansion coefficient | MD | ASTMD696 | 5.2E-05 | cm/cm/°C |
| Glass Transition Temperature | | ℃ | DSC | 223 |
| Coefficient of Linear Thermal Expansion | | cm/cm/℃ | ASTM D696 | 0.00058 |
| Continuous Use Temperature | | ℃ | ASTM D794 | 180 |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Surface resistance | | ohms | ASTM D257 | |
| Dissipation Factor? | 23℃，60Hz | | ASTM D150 | |
| Insulation strength | | kV/mm | ASTM D149 | |
| Volume Resistivity | | ohm-cm | ASTM D257 | |
| Dielectric Strength | | ASTMD149 | 15 | KV/mm |
| Dissipation Factor? | 60Hz | ASTMD150 | 1.7E-03 | |
| Dissipation Factor? | 1kHz | ASTMD150 | 2.2E-03 | |
| Dissipation Factor? | 1MHz | ASTMD150 | 5.6E-03 | |
| Dielectric Constant | 23℃，60Hz | | ASTM D150 | 3.20 |
| Dielectric Constant | 60Hz | ASTMD150 | 3.51 | |
| Dielectric Constant | 1kHz | ASTMD150 | 3.50 | |
| Dielectric Constant | 1MHz | ASTMD150 | 3.54 | |
| Arc Resistance | | sec | ASTM D495 | |
| Volume Resistivity | | ASTMD257 | 1.7E+15 | ohms·cm |
| Comparative Tracking Index | | V | ASTM D3638 | 150 |
| Oxygen Index | | % | ASTM D2863 | |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| Flame Rating | 0.75mm,ALL | UL94 | V-0 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices