TPE GLS™ Versaflex™ OM 1262NX-1 SUZHOU GLS

196

Properties:
Low gloss
Processability
Good forming performance
Good colorability
Usages:
Wrapping molding
Thin walled components
Electrical field
Electronic field
power
Tool products
Soft handle
Business equipment
Consumer goods sector
Wrapping molding
Thin walled components
Electrical/Electronic App
Power/Other Tools
Soft handle
Business equipment
Consumer product applicat
Certificates:
UL
Compare

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Modeling Shrinkage	MD	ASTMD955	0.90到1.5	%
Melt Mass-Flow Rate	190°C/2.16kg	ASTMD1238	11	g/10min
Melt Mass-Flow Rate	Melt Mass-Flow Rate	200°C/5.0kg	ASTMD1238	64	g/10min

Elastomers Properties	Test Condition	Test Method	Test Result	Unit
Compression Set	23°C,22hr	ASTMD395B	35	%
Tensile Stress	100%应变,23°C	ASTMD412	2.55	Mpa
Tensile Stress	Tensile Stress	300%应变,23°C	ASTMD412	3.34	Mpa
Tensile Strength	断裂,23°C	ASTMD412	7.64	Mpa
Tensile Elongation	断裂,23°C	ASTMD412	710	%

Fill Analysis	Test Condition	Test Method	Test Result	Unit
pparent Viscosity	200°C,11200sec^-1	ASTMD3835	20.0	Pa·s

hardness	Test Condition	Test Method	Test Result	Unit
Shore Hardness	邵氏A,10秒	ASTMD2240	65

Flammability	Test Condition	Test Method	Test Result	Unit
UL flame retardant rating	1.5mm	UL94	HB

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.