Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Moisture Absorption | 饱和,23°C | ISO62 | 0.50 | % |
| Moisture Absorption | 平衡,23°C,50%RH | ISO62 | 0.20 | % |
| Melt Volume flow Rate | 240°C/5.0kg | ISO1133 | 24.0 | cm3/10min |
| Density / Specific Gravity | 23°C | ISO1183 | 1.18 | g/cm³ |
| Melt Viscosity | 260°C | ISO11443-A | 160 | Pa·s |
| Modeling Shrinkage | TD:240°C,3.00mm | ISO2577 | 0.50to0.70 | % |
| Modeling Shrinkage | MD:240°C,3.00mm | ISO2577 | 0.50to0.70 | % |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Stress | 屈服,23°C | ISO527-2/50 | 60.0 | Mpa |
| Tensile Stress | 断裂,23°C | ISO527-2/50 | 45.0 | Mpa |
| Tensile Strain | 屈服,23°C | ISO527-2/50 | 3.5 | % |
| Tensile Strain | 断裂,23°C | ISO527-2/50 | >40 | % |
| Tensile Modulus | 23°C | ISO527-2/1 | 2700 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | 0.45MPa,未退火 | ISO75-2/B | 92.0 | °C |
| Deflection Temperature Under Load? | 1.8MPa,未退火 | ISO75-2/A | 82.0 | °C |
| Linear thermal expansion coefficient | MD：23到55°C | ISO11359-2 | 7.6E-05 | cm/cm/°C |
| Linear thermal expansion coefficient | TD：23to55°C | ISO11359-2 | 8E-05 | cm/cm/°C |
| Vicat Softening Temperature | -- | ISO306/B50 | 95.0 | °C |
| Vicat Softening Temperature | -- | ISO306/B120 | 97.0 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Relative Permittivity | 23°C,100Hz | IEC60250 | 3.20 | |
| Relative Permittivity | 23°C,1MHz | IEC60250 | 3.10 | |
| Comparative Tracking Index | 解决方案A | IEC60112 | 350 | V |
| Dielectric Strength | 23°C,1.00mm | IEC60243-1 | 35 | KV/mm |
| Surface Resistivity | | IEC60093 | 1E+16 | ohms |
| Volume Resistivity | 23°C | IEC60093 | 1E+16 | ohms·cm |
| Dissipation Factor? | 23°C,100Hz | IEC60250 | 5E-03 | |
| Dissipation Factor? | 23°C,1MHz | IEC60250 | 6E-03 | |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Notched Izod impact strength | 23°C | ISO180 | NoBreak | |
| Notched Izod Impact Strength | -30°C | ISO180/A | 10 | kJ/m² |
| Notched Izod Impact Strength | 23°C | ISO180/A | 35 | kJ/m² |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | 1.5mm | UL94 | V-0 | |
| UL flame retardant rating | 2.0mm | UL94 | 5VB | |
| UL flame retardant rating | 3.0mm | UL94 | 5VA | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices