Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | MD | ASTMD955 | 0.70 | % |
| Water absorption rate | 24hr | ASTMD570 | 0.30 | % |
| Melt mass flow rate | 343°C/2.16kg | ASTMD1238 | 3.0to5.0 | g/10min |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile modulus | | ASTMD638 | 2480 | Mpa |
| elongation | 断裂 | ASTMD638 | 50to100 | % |
| Bending modulus | | ASTMD790 | 2690 | Mpa |
| bending strength | | ASTMD790 | 106 | Mpa |
| Tensile strength | 断裂 | ASTMD638 | 70.3 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 1.8MPa,未退火 | ASTMD648 | 174 | °C |
| Linear coefficient of thermal expansion | MD | ASTMD696 | 5.6E-05 | cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric strength | | ASTMD149 | 17 | KV/mm |
| Dissipation factor | 60Hz | ASTMD150 | 7E-03 | |
| Dissipation factor | 1kHz | ASTMD150 | 1E-03 | |
| Dissipation factor | 1MHz | ASTMD150 | 6E-03 | |
| Dielectric constant | 1kHz | ASTMD150 | 3.04 | |
| Dielectric constant | 1MHz | ASTMD150 | 3.02 | |
| Dielectric constant | 60Hz | ASTMD150 | 3.03 | |
| Volume resistivity | | ASTMD257 | 3E+16 | ohms·cm |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile impact strength | | ASTMD1822 | 420 | kJ/m² |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices