Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Water absorption rate | 饱和, 23℃ | ISO 62 | 0.60 | % |
| Dissolved volume flow rate | MVR 220°C/10.0 kg | ISO 1133 | 25.0 | cm3/10min |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile modulus | 23℃ | ISO 527-2 | 2600 | Mpa |
| Tensile stress | 屈服, 23℃ | ISO 527-2 | 63.0 | Mpa |
| Tensile strain | 屈服, 23℃ | ISO 527-2 | 4.6 | % |
| bending strength | 23℃ | ISO 178 | 100 | Mpa |
| Charpy Notched Impact Strength | -30℃ | ISO 179 | 11 | kJ/m² |
| Charpy Notched Impact Strength | 23℃ | ISO 179 | 70 | kJ/m² |
| Charpy Notched Impact Strength | -30℃ | ISO 179 | 无断裂 | kJ/m² |
| Charpy Notched Impact Strength | 23℃ | ISO 179 | 无断裂 | kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 0.45 MPa, 未退火 | ISO 75-2/B | 124 | °C |
| Hot deformation temperature | 1.8 MPa, 未退火 | ISO 75-2/A | 105 | °C |
| Vicat softening temperature | | ISO 306/B50 | 120 | °C |
| Linear expansion coefficient | 流动 | ISO 11359-2 | 0.000080 | cm/cm/℃ |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Surface resistivity | | IEC 60093 | 1E+13 | Ohm |
| Volume resistivity | | IEC 60093 | 1E+14 | ohm·cm |
| Dielectric constant | 100 Hz | IEC 60250 | 3.10 | |
| Dielectric constant | 1 MHz | IEC 60250 | 3.00 | |
| Power consumption factor | 100 Hz | IEC 60250 | 0.0060 | |
| Power consumption factor | 1 MHz | IEC 60250 | 0.012 | |
| Leakage Trace Index | | IEC 60112 | 225 | V |
| Electrical strength | 1.50 mm | IEC 60243-1 | 38 | KV/mm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices