Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | MD | ASTMD955 | 0.70 | % |
| Water absorption rate | 24hr | ASTMD570 | 0.37 | % |
| Melt mass flow rate | | ASTMD1238 | 14to20 | g/10min |
| Density/specific gravity | | ASTMD792 | 1.30 | g/cm³ |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Compressive modulus | | ASTMD695 | 1730 | Mpa |
| compressive strength | | ASTMD695 | 98.9 | Mpa |
| shear strength | | ASTMD732 | 62.7 | Mpa |
| Poisson's ratio | | ASTME132 | 0.42 | |
| Tensile strength | 屈服 | ASTMD638 | 69.6 | Mpa |
| Tensile strength | 断裂 | ASTMD638 | 69.6 | Mpa |
| Tensile modulus | | ASTMD638 | 2340 | Mpa |
| elongation | 屈服 | ASTMD638 | 7.2 | % |
| elongation | 断裂 | ASTMD638 | 60 | % |
| Bending modulus | | ASTMD790 | 2410 | Mpa |
| bending strength | 屈服 | ASTMD790 | 91.0 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 0.45MPa,未退火 | ASTMD648 | 214 | °C |
| Hot deformation temperature | 1.8MPa,未退火 | ASTMD648 | 207 | °C |
| Glass transition temperature | | ASTME1356 | 220 | °C |
| thermal conductivity | | ASTMC177 | 0.35 | W/m/K |
| Linear coefficient of thermal expansion | MD | ASTMD696 | 5.6E-05 | cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric strength | | ASTMD149 | 14 | KV/mm |
| Dielectric constant | 60Hz | ASTMD150 | 3.44 | |
| Dielectric constant | 1kHz | ASTMD150 | 3.40 | |
| Volume resistivity | | ASTMD257 | 9E+15 | ohms·cm |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile impact strength | | ASTMD1822 | 399 | kJ/m² |
| Impact strength of cantilever beam gap | | ASTMD256 | 690 | J/m |
| Impact strength of cantilever beam gap | | ASTMD256 | NoBreak | |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Refractive index | | ASTMD542 | 1.672 | |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| Extreme Oxygen Index | | ASTMD2863 | 38 | % |
| FlameRating5 | 0.75mm,ALLcolors,ULfileE36098 | UL94 | V-0 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices