Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Shrinkage rate | MD | ASTMD955 | 0.30 | % |
| Melt mass flow rate | 343°C/2.16kg | ASTMD1238 | 6.5 | g/10min |
| Density/specific gravity | | ASTMD792 | 1.40 | g/cm³ |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile modulus | | ASTMD638 | 6000 | Mpa |
| elongation | 断裂 | ASTMD638 | 3.0 | % |
| Bending modulus | | ASTMD790 | 5520 | Mpa |
| bending strength | | ASTMD790 | 148 | Mpa |
| Tensile strength | | ASTMD638 | 96.5 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 1.8MPa,未退火 | ASTMD648 | 180 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric constant | 60Hz | ASTMD150 | 3.31 | |
| Dielectric constant | 1MHz | ASTMD150 | 3.28 | |
| Volume resistivity | | ASTMD257 | 2E+16 | ohms·cm |
| Dissipation factor | 60Hz | ASTMD150 | 8E-03 | |
| Dissipation factor | 1MHz | ASTMD150 | 6E-03 | |
| Dielectric strength | | ASTMD149 | 19 | KV/mm |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 53 | J/m |
| Tensile impact strength | | ASTMD1822 | 109 | kJ/m² |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating 4 | 3.2mm | UL94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices