PC Makrolon® 9417 700394 COVESTRO SHANGHAI

362

Properties:
high viscosity
High temperature resistan
Filler: Glass fiber reinf
10% filler by weight
10% filler by weight
Usages:
Electronic and electrical
Automotive Applications
Certificates:
UL
Compare
View Prices

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result	Unit
Shrinkage rate	MD:2.00mm3	ISO294-4	0.60	%
	Shrinkage rate	TD	ISO2577	0.40to0.60	%
		Shrinkage rate	MD	ISO2577	0.40to0.60	%
		Shrinkage rate	Shrinkage rate	TD:2.00mm3	ISO294-4	0.45	%
Water absorption rate	饱和,23°C	ISO62	0.26	%
Water absorption rate	Water absorption rate	平衡,23°C,50%RH	ISO62	0.10	%
Melt mass flow rate	300°C/1.2kg	ISO1133	7.0	g/10min
Melt volume flow rate	300°C/1.2kg	ISO1133	6.00	cm3/10min
Density/specific gravity	23°C	ISO1183	1.27	g/cm³
Apparent density 2		ISO60	0.64	g/cm³

Mechanical performance	Test Condition	Test Method	Test Result	Unit
Bending strain 5	23°C	ISO178	5.8	%
Bending stress 4	3.5%Strain,23°C	ISO178	95.0	Mpa
Bending stress 4	Bending stress 4	23°C	ISO178	105	Mpa
Bending modulus 4	23°C	ISO178	3600	Mpa
TensileCreepModule	1hr	ISO899-1	3600	Mpa
Tensile stress	屈服,23°C	ISO527-2/5	64.0	Mpa
Tensile stress	Tensile stress	断裂,23°C	ISO527-2/5	45.0	Mpa
Tensile strain	屈服,23°C	ISO527-2/5	4.6	%
Tensile strain	Tensile strain	断裂,23°C	ISO527-2/5	15	%
Tensile creep modulus	1000hr	ISO899-1	2900	Mpa
Tensile modulus	23°C	ISO527-2/1	3800	Mpa

Thermal performance	Test Condition	Test Method	Test Result	Unit
Hot deformation temperature	0.45MPa,未退火	ISO75-2/B	141	°C
Hot deformation temperature	Hot deformation temperature	1.8MPa,未退火	ISO75-2/A	135	°C
BallPressure Test	136°C	IEC60695-10-2	Pass
RTIElec	1.5mm	UL746	125	°C
Evolution Calendar intelligent importer	1.5mm	UL746	115	°C
RTIStr	1.5mm	UL746	125	°C
Vicat softening temperature	--	ISO306/B50	143	°C
Vicat softening temperature	Vicat softening temperature	--	ISO306/B120	144	°C
Linear coefficient of thermal expansion	MD：23到55°C	ISO11359-2	4E-05	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD：23to55°C	ISO11359-2	6.5E-05	cm/cm/°C
Thermal conductivity coefficient 8	23°C	ISO8302	0.22	W/m/K

Electrical performance	Test Condition	Test Method	Test Result	Unit
Dielectric strength	23°C,1.00mm	IEC60243-1	36	KV/mm
Dissipation factor	23°C,100Hz	IEC60250	1E-03
Dissipation factor	Dissipation factor	23°C,1MHz	IEC60250	9E-03
Relative permittivity	23°C,100Hz	IEC60250	3.20
Relative permittivity	Relative permittivity	23°C,1MHz	IEC60250	3.20
Leakage Trace Index	解决方案A	IEC60112	175	V
Leakage Trace Index	Leakage Trace Index	解决方案B	IEC60112	125	V
Surface resistivity		IEC60093	1E+16	ohms
Volume resistivity	23°C	IEC60093	1E+16	ohms·cm

Impact performance	Test Condition	Test Method	Test Result	Unit
Impact strength of simply supported beam without notch	-60°C,CompleteBreak	ISO179/1eU	100	kJ/m²
	Impact strength of simply supported beam without notch	-30°C,完全断裂	ISO179/1eU	120	kJ/m²
	Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C,完全断裂	ISO179/1eU	150	kJ/m²
Multi axis Instrumented Impact Energy	23°C	ISO6603-2	25.0	J
Multi axis Instrumented Impact Energy	Multi axis Instrumented Impact Energy	-30°C	ISO6603-2	15.0	J
CharpyNotchedImpactStrength6	23°C,CompleteBreak	ISO7391	10	kJ/m²
NotchedIzodImpactStrength7	23°C,CompleteBreak	ISO7391	10	kJ/m²
Multi axis Instrumented Peak Impact Force	-30°C	ISO6603-2	3700	N
Multi axis Instrumented Peak Impact Force	Multi axis Instrumented Peak Impact Force	23°C	ISO6603-2	4000	N

hardness	Test Condition	Test Method	Test Result	Unit
Ball pressure hardness		ISO2039-1	128	Mpa

flammability	Test Condition	Test Method	Test Result	Unit
Extreme Oxygen Index 9		ISO4589-2	35	%
ApplicationofFlamefromSmallBurner MethodKandF	2.00mm	DIN53438-1,-3	K1,F1
UL flame retardant rating	1.5mm	UL94	V-0
	UL flame retardant rating	3.0mm,NC,BK,GY	UL94	5VA
	UL flame retardant rating	UL flame retardant rating	6.0mm	UL94	5VA
Burning wire flammability index	0.75mm	IEC60695-2-12	960	°C
	Burning wire flammability index	1.5mm	IEC60695-2-12	960	°C
	Burning wire flammability index	Burning wire flammability index	3.0mm	IEC60695-2-12	960	°C
Hot filament ignition temperature	1.0mm	IEC60695-2-13	825	°C
	Hot filament ignition temperature	1.5mm	IEC60695-2-13	900	°C
	Hot filament ignition temperature	Hot filament ignition temperature	3.0mm	IEC60695-2-13	900	°C
Burning rate - US-FMVSS	>1.00mm	ISO3795	passed
FlashIgnitionTemperature		ASTMD1929	470	°C
SelfIgnition		ASTMD1929	550	°C

Supplementary Information	Test Condition	Test Method	Test Result	Unit
ElectrolyticalCorrosion	23°C	IEC60426	A1
ISO Shortcut			ISO7391-PC,MFLR,(,,)-09-9,GF10

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

PC Makrolon® 9417 700394 COVESTRO SHANGHAI

Technical Data Sheet

You May Like