Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| gloss | | ASTM D-2457 | 80 | |
| Haze | 60° | ASTM D-1003 | 13 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| elongation at break | MD | ASTM D-882 | 700 | % |
| elongation at break | TD | ASTM D-882 | 750 | % |
| Anti puncture strength | | SABIC | 63 | J/mm |
| Falling hammer impact strength | | ASTM D-1709 | 85 | g |
| 1% secant modulus | MD | ASTM D-882 | 220 | Mpa |
| 1% secant modulus | TD | ASTM D-882 | 260 | Mpa |
| Men's tear strength | MD | ASTM D-1922 | 130 | g |
| Men's tear strength | TD | ASTM D-1922 | 320 | g |
| Tensile strength at break | MD | ASTM D-882 | 35 | Mpa |
| Tensile strength at break | TD | ASTM D-882 | 29 | Mpa |
| Yield tensile strength | MD | ASTM D-882 | 12 | Mpa |
| Yield tensile strength | TD | ASTM D-882 | 10 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| vicat softening point | | ASTM D-1525 | 98 | °C |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| density | 23℃ | ASTM D-1505 | 918 | kg/m3 |
| Melt flow rate | 190℃/2.16kg | ASTM D-1238 | 2 | g/10min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices