Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| gloss | 无纹理,60℃ | ASTM D-523 | 90 | |
| Mold shrinkage rate | xflow,0.125" | ASTM D-955 | 5-7 | in/inE-3 |
| Mold shrinkage rate | flow,0.125" | ASTM D-9955 | 5-7 | in/inE-3 |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Instrument control anti impact total energy | -22°F | ASTM D1646 | 300 | in-lbs |
| Rockwell hardness | | ASTM D-785 | 114 | R scale |
| Izod Impact Value Gap | -22°F | ASTM D-256 | 1.2 | ft-lb/in |
| Fracture tensile elongation | 2.0in/min | ASTM D-638 | 25.0 | % |
| Izod Impact Value Gap | 73°F | ASTM D-256 | 3.2 | ft-lb/in |
| Yield tensile strength | 2.0in/min | ASTM D-638 | 8600 | psi |
| Instrument control anti impact total energy | 73°F | ASTM D1646 | 330 | in-lbs |
| Yield flexural strength | 0.250" | ASTM D-790 | 12800 | psi |
| Flexural modulus | 0.05in/min,2"span | ASTM D-790 | 375000 | psi |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Thermal distortion temperature | 264Psi,0.125 | ASTM D-648 | 195 | deg°F |
| Coefficient of thermal expansion | xflow,0°F-300°F | ASTM E-831 | 4×10 | in/in°F |
| Thermal distortion temperature | 66Psi,0.125 | ASTM D-648 | 217 | deg°F |
| Coefficient of thermal expansion | flow,0°F-300°F | ASTM E-831 | 4×10 | in/in°F |
| Thermal conductivity | | ASTM C-177 | 0.25 | W/m-c |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt index | 标称,260℃/5.0kgf | ASTM D-1238 | 18.0 | g/10min |
| Water absorption rate | 24小时@73°F | ASTM D-570 | 0.240 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices