Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Apparent density | | 内部方法 | 0.41 | g/cm³ |
| Chlorine content | | ISO1158 | 35.0 | wt% |
| oils | 大豆油 | 内部方法 | 3.0 | phr |
| Ash Content | | ISO247 | <2.0 | % |
| Volatile compounds | | ISO248 | <0.30 | % |
| Average particle size | | ISO2591-1 | 300 | µm |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile stress | 100% Strain | MPa | ISO 37 | 1 |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Melting heat | | J/g | | |
| Fusion heat | | 内部方法 | <2.00 | J/g |
| Melt viscosity | | Pa·s | ISO 11443 | 2400 |
| elastomer | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile stress 2 | 100%应变 | ISO37 | 1.00 | Mpa |
| Filling analysis | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt viscosity | | ISO11443 | 2400 | Pa·s |
| Basic performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Apparent density | | g/cm | | 0.41 |
| Chlorine content | | wt% | | |
| ash content | | % | ISO 247 | |
| Average particle size | | mm | ISO 2591-1 | 0.3 |
| Volatile substance content | | % | ISO 248 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices